User's Guide

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Managed Industrial L2 Switch
158
Spanning Tree
• IEEE 802.1d STP (spanning tree protocol)
• IEEE 802.1w RSTP (rapid spanning tree protocol)
• BPDU filter, guard, and root guard
Link Aggregation
• Static link aggregation and 802.1ax/802.3ad dynamic LACP (Up to 8 groups)
Quality of Service (QoS)
• 802.1p Class of service (CoS)
• DSCP (Differentiated Services Code Point)
• Bandwidth control per port
• Queue Scheduling: strict priority (SP), weighted round robin (WRR), weighted
fair queuing (WFQ)
VLAN
• 802.1Q tagged VLAN
• MAC-based VLAN
• Port isolation
• Up to 256 VLAN groups, ID range 1-4094
Multicast
• IGMP snooping v1, v2, v3
• IGMP querier
• IGMP fast/immediate leave
• Up to 256 multicast groups
• Static multicast entries
Access Control
• 802.1X authentication (Local user database, RADIUS, guest VLAN assignment)
• DHCP snooping/screening
• Trusted host/IP access list for management access
• Port Security/MAC address learning restriction (Up to 100 entries per port)
• Static/dynamic ARP inspection
ACL
• Source/Destination MAC address
• Source/Destination IP address
• Source Interface
• VLAN ID
• EtherType
• TCP/UDP port 1-65535
Special Features
• Netlite device discovery and map display in GUI
• Port security: MAC address learning restriction per port
• DHCP relay/option 82 & DHCP server snooping/screening support
• Wide operating temperature range
• Dual redundant power inputs
• Alarm relay triggered by power failure
• Surge and ESD protection
Power
• PWR (Primary) terminal input: 12 – 60V DC (TI-S12048 sold separately)
• RPS (Redundant) terminal input: 12 – 60V DC (TI-S12048 sold separately)
• Compatible power supply: TI-M6024 (60W), TI-S12048 (120W), TI-S24048
(240W) sold separately
• Max. Consumption: 12W
Terminal Block
• Redundant power inputs, alarm relay contact, 6 pin
• Wire range: 0.5 mm^2 to 2.5 mm^2
• Solid wire (AWG): 12-26
• Stranded wire (AWG): 12-26
• Wire strip length: 10-11mm