User's Guide

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Managed Industrial L2 Switch
152
Management
• HTTP web based GUI
• CLI: Telnet / SSHv2
• SNMP v1, v2c, v3
• SNMP trap (up to 5 receivers)
• RMON groups 1/2/3/9
• Device configuration backup & restore, upgrade firmware, reboot, and reset to
default
• Multiple administrative or read-only user accounts
• Enable or disable power saving mode per port
• Static MAC entries
• LLDP (Link layer discovery protocol)
• Netlite device map
• ONVIF device discovery
• SNTP
• SMTP alert
• Syslog
• Port statistics/utilization
• Traffic monitor
• Port mirror: one to one, many to one
• Storm control: Broadcast, multicast, destination lookup failure (Min. limit:
1pps)
• Loopback detection
• DHCP relay/option 82
• SFP DDMI (Digital Diagnostic Monitoring Interface)
Access Control
• 802.1X authentication (Local user database, RADIUS, guest VLAN assignment)
• DHCP snooping/screening
• Trusted host/IP access list for management access
• Port Security/MAC address learning restriction (Up to 100 entries per port)
• Static/dynamic ARP inspection
ACL
• Source/Destination MAC address
• Source/Destination IP address
• Source Interface
• VLAN ID
• EtherType
• TCP/UDP port 1-65535
Special Features
• Netlite device discovery and map display in GUI
• Port security: MAC address learning restriction per port
• DHCP relay/option 82 & DHCP server snooping/screening support
• Wide operating temperature range
• Dual redundant power inputs
• Alarm relay triggered by power failure
• Surge and ESD protection
Power
• PWR (Primary) terminal input: 20 – 60V DC
• RPS (Redundant) terminal input: 20 – 60V DC
• Compatible power supply: TI-M6024 (60W), TI-S12024 (120W), TI-S12048
(120W), TI-S24048 (240W) sold separately
• Max. Consumption: 12W
Terminal Block
• Redundant power inputs, alarm relay contact, 6 pin
• Wire range: 0.5 mm^2 to 2.5 mm^2
• Solid wire (AWG): 12-26
• Stranded wire (AWG): 12-26
• Wire strip length: 10-11mm