User's Guide

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Managed Industrial L2 Switch
98
Priority
Configures the priority for the specific port.
Edge Port
Configures the port type for the specific port. Edge or Non-
Edge.
BPDU Filter
Enables/Disables the BPDU filter function for the specific port.
BPDU Guard
Enables/Disables the BPDU guard function for the specific port.
ROOT Guard
Enables/Disables the BPDU root guard function for the specific
port.
Port Status
Active
The state of the STP function.
Role
The port role. Should be one of the Alternated / Designated /
Root / Backup / None.
Status
The port’s status. Should be one of the Discarding / Blocking /
Listening / Learning / Forwarding / Disabled.
Path Cost
The port’s path cost.
Priority
The port’s priority.
Edge Port
The state of the edge function.
BPDU Filter
The state of the BPDU filter function.
BPDU Guard
The state of the BPDU guard function.
ROOT Guard
The state of the BPDU Root guard function.
STP Status
Advanced Settings > STP > STP Status
Parameter
Description
Current Root Status
MAC address
This is the MAC address of the root bridge.
Priority
Root refers to the base of the spanning tree (the root bridge).
This field displays the root bridge’s priority. This Switch may
also be the root bridge.
MAX Age
This is the maximum time (in seconds) the Switch can wait
without receiving a configuration message before attempting
to reconfigure.
Hello Time
This is the time interval (in seconds) at which the root switch
transmits a configuration message. The root bridge
determines Hello Time, Max Age and Forwarding Delay.
Forward Delay
This is the time (in seconds) the root switch will wait before
changing states.
Current Bridge Status
MAC address
This is the MAC address of the current bridge.
Priority
Priority is used in determining the root switch, root port and
designated port. The switch with the highest priority (lowest
numeric value) becomes the STP root switch. If all switches