Datasheet

Management
• HTTP web-based GUI
• CLI: Telnet / SSHv2
• SNMP v1, v2c, v3
• SNMP trap (up to 5 receivers)
• RMON groups 1/2/3/9
• Device configuration backup & restore, upgrade
firmware, reboot, and reset to default
• Multiple administrative or read-only user
accounts
• Enable or disable power saving mode per port
• Static MAC entries
• LLDP (Link layer discovery protocol)
• Netlite device map
• ONVIF device discovery
• SNTP
• SMTP alert
• Syslog
• Port statistics/utilization
• Traffic monitor
• Port mirror: one to one, many to one
• Storm control: Broadcast, multicast, destination
lookup failure (Min. limit: 1pps)
• Loopback detection
• DHCP relay/option 82
• Modbus/TCP
• SFP DDMI (Digital Diagnostic Monitoring
Interface)
Access Control
• 802.1X authentication (Local user database,
RADIUS, guest VLAN assignment)
• DHCP snooping/screening
• Trusted host/IP access list for management
access
• Port Security/MAC address learning restriction
(Up to 100 entries per port)
• Static/dynamic ARP inspection
ACL
• Source/Destination MAC address
• Source/Destination IP address
• Source Interface
• VLAN ID
• EtherType
• TCP/UDP port 1-65535
TI-G642i
Special Features
• Netlite device discovery and map display in GUI
• Port security: MAC address learning restriction
per port
• DHCP relay/option 82 & DHCP server snooping/
screening support
• Wide operating temperature range
• Dual redundant power inputs
• Alarm relay triggered by power failure
• Surge and ESD protection
Power
• PWR (Primary) terminal input: 20 – 60V DC
• RPS (Redundant) terminal input: 20 – 60V DC
• Compatible power supply: TI-M6024 (60W), TI-
S12024 (120W), TI-S12048 (120W), and TI-
S24048 (240W) sold separately
• Max. consumption: 12W
Terminal Block
• Redundant power inputs, alarm relay contact, 6
pin
• Wire range: 0.5 mm^2 to 2.5 mm^2
• Solid wire (AWG): 12-26
• Stranded wire (AWG): 12-26
• Wire strip length: 10-11mm
DIP Switch
Switch Status Function
1 OFF Disable alarm relay for PWR
power input
ON Enable alarm relay for power
failure on PWR power input
2 OFF Disable alarm relay for RPS
power input
ON Enable alarm relay for power
failure on RPS power input
Alarm Relay Output
• Relay output with current carrying capacity of
1A, 24V DC
• Short circuit mode when one power source is
connected
• Open circuit mode when two power sources are
connected
20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • [e-mail] • www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at
any time, without notice. For the most recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.
Updated: 6/24/2019
Enclosure
• IP30 rated metal enclosure
• Fanless passive cooling
• DIN-Rail mount
• Grounding point
• ESD (Ethernet) Protection: 8KV DC
• Surge (Power) Protection: 2KV DC
MTBF
• 996,299 hours @ 25° C
• 125,932 hours @ 75° C
Operating Temperature
• -40° – 75° C (-40° – 167° F)
Operating Humidity
• Max. 95% non-condensing
Dimensions
• 160 x 120 x 50mm (6.3 x 4.72 x 1.97 in.)
Weight
• 720g (1.59 lbs.)
Certifications
• CE
• FCC
• Shock (IEC 60068-2-27)
• Freefall (IEC 60068-2-32)
• Vibration (IEC 60068-2-6)
Warranty
• 3 year
Package Contents
• TI-G642i
• Quick Installation Guide
• Removable terminal block
• DIN rail mounting bracket