2. Quick Reference Nita: The switch model and power supply may be different than the one shown In the example g below.
3. Hardware Installation E ‘The swish can be placed on 2 desktop, wall mourned, or mourned to a DIN-Rail. DIN-All Mounting Instructions: 1. Attach the DIN-rail mount bracket o the switch. Nos: The swish may b different than the one shown In the examples below. 2. Population the unit In front of the DIN-All and hook the mount bracket over the top of the tall. 3. Rotate the unit downward towards the rail to lock it into place. You will know it is secure: ‘when you hear the click.
Applying Power 1. Connect the power supply (sold separately) to the included terminal block (a5 shown below) and secure with the screws. Note: Polarities must match. 2. Attach the terminal block to the unit, connect the ground wits to the ground, and supply power to the power adapter. Mote: The switch model and power supply may be different than the one shown in the example below.
3. Connect a network source and devices to the switch. Check the LESS to confirm the connections are established. Your Installation Is completed. Mote: Pleads refer to the LED definition section on page 8-13 for reference to your switch modal. It available on your switch (TI-G102 /TI-G162), the 4-pl DIN types connector can also be used 25 an additional power input (48VDC3000 power adapter sold separately). VVe oo «Tum off the power before connecting any modules or wire.
THG162 Status Ascription Dolls Green Po war |5 Detected A off Power is Not Detected " Solid Green Power is Detected off Power ls Not Detected Dolls Amber Po war |5 Detected F off Power is Not Detected RLY Solid Amber Connected only FW1 or FW2 or PW3 off Both PW1 and PW2 are connected and powered Dolls Green Connected LNK Hashing Green Data Transmitting / Receiving off No Connection Dolls Green Conn acted SFP {FIGHT) | Ashing Green Data Transmitting / Revolving Off No Connection
