Datasheet

FEATURES
SPECIFICATIONS
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• IEEE 802.3x
• IEEE 802.3z
Device Interface
• 14 x Gigabit ports
• 2 x Gigabit SFP slots
• 6-pin removable terminal block
• LED indicators
• DIN-Rail mount
• Wall mount
• Grounding point
Data Transfer Rate
• Ethernet: 10Mbps (half duplex), 20Mbps (full
duplex)
• Fast Ethernet: 100Mbps (half duplex),
200Mbps (full duplex)
• Gigabit: 2000Mbps (full duplex)
• SFP: 2000Mbps (full duplex)
Performance
• Data RAM Buffer: 512KB
• Switching Fabric: 32Gbps
• MAC Address Table: 8K entries
• Jumbo Frame: 9KB
• Forwarding rate: 23.8Mpps (64-byte packet
size)
Special Features
• Hardened components rated for extreme
temperatures
• Multiple power inputs
• ESD contact 6kV, air 8kV, and surge 2kV
support
• Low-profile design
DC Power
• Input: 12 – 56V DC
• Recommended power supply: TI-M6024 (sold
separately)
• Max. consumption: 13W
Optional Power Adapter (48VDC3000 sold
separately)
• Input: 100 – 240V AC, 50/60Hz, 2A
• Output: 48V DC, 3.34A 160W max.
Terminal Block
• Redundant power inputs, alarm relay contact, 6
pin
• Wire range: 0.34mm^2 to 2.5mm^2
• Solid wire (AWG): 12-24/14-22
• Stranded wire (AWG): 12-24/14-22
• Torque: 5 lb. – In / 0.5Nm / 0.56Nm
• Wire strip length: 7-8mm
Alarm Relay Contact
• Relay outputs with current carrying capacity of
1A, 24V DC
• Open circuit mode when two power sources
are connected
• Short circuit mode when only one power
source is connected
MTBF
• 514,167 hrs @ 50° C
• 188,310 hrs @ 75° C
Housing
• IP30 metal case
• DIN-Rail mount
• Wall mount
• Grounding point
• 6kV contact protection
• 8kV air protection
• 2kV surge protection
Gigabit Ports
Industrial switch features copper
Gigabit ports for high-speed device
connections, and Gigabit SFP slots
that supports 1000Base-FX modules
for long distance fiber networking
applications
DIN-Rail / Wall Mounts
IP30 rated metal enclosure on the
industrial switch with included DIN-Rail
mount and wall mount hardware
Redundant Power
Multiple power inputs provide
redundant power with overload current
protection (power supply sold
separately, model: TI-M6024)
Alarm Relay
Hardened industrial switches each
with an alarm relay triggered by power
failure of primary and/or redundant
power
Jumbo Frame
Supports larger packets, or Jumbo
Frames (up to 9KB), for increased
performance
Wide Temperature Range
A wide operating temperature range of
-40° – 75° C (-40° – 167° F) allows for
the installations of the industrial
switches in environments with extreme
hot or cold conditions
Shock and Vibration Resistant
Rated for shock (EN 60068-2-27),
freefall (EN 60068-2-32), and vibration
(EN 60068-2-6)
Electro Magnetic Compliance
Complies with industrial EMS
certifications (IEC 61000-4-2) ESD:
Contact: 6kV | Air: 8kV, (IEC
61000-4-4) EFT: Power: 2kV | Signal:
2kV, (61000-4-5) Surge: Power: 2kV |
Signal: 2kV
Grounding Point
Industrial switches feature a grounding
point for protection against external
electrical surges
TI-G162