Datasheet

Specifications
Standards
IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3z
IEEE 802.3x
Device Interface
1 x Gigabit port
1 x Gigabit SFP slot
4-pin removable terminal block
LED indicators
DIP Switch
DIN-Rail mount
Wall mount
Grounding point
Data Transfer Rate
Ethernet: 10 Mbps (half duplex), 20 Mbps (full
duplex)
Fast Ethernet: 100 Mbps (half duplex), 200 Mbps
(full duplex)
Gigabit: 2000 Mbps (full duplex)
Performance
Data RAM Buffer: 1024 KB
Jumbo Frame: 9 KB
Special Features
Hardened components rated for extreme
temperatures
Dual redundant power inputs
Auto-Negotiation
Auto store and forward architecture
Automatic address learning and address aging
ESD 8 KV and Surge 6 KV protection
Power
Input: 12 - 56 V DC or 18 - 36 V AC
Compatible power supply: TI-M6024 (sold
separately)
Consumption: Max. 3 Watts
Terminal Block
Redundant power inputs, 4 pin
Wire range: 0.34 mm^2 to 2.5 mm^2
Solid wire (AWG): 12-24/14-22
Stranded wire (AWG): 12-24/14-22
Torque: 5 lb. – In / 0.5 Nm / 0.56 Nm
Wire strip length: 7-8 mm
DIP Switch
1: Set SFP speed to 100 Mbps or 1000 Mbps
2: Enable or disable auto-negotiation on SFP port
3: Set to switch or pass through mode
4: Turns LFP (Link Fault Pass Through) on or off
MTBF
510,304 hours
Housing
IP30 metal case
DIN-rail mount
Wall mount
Grounding point
8 KV ESD protection
6 KV surge protection
Operating Temperature
- 40 to 75 °C (-40 to 167 °F)
Operating Humidity
Max. 95 % non-condensing
Dimensions
113 x 82 x 31 mm (4.4 x 3.2 x 1.2 in.)
Weight
152 g (5.4 oz.)
Certifications
CE
FCC
Shock (IEC 60068-2-27)
Freefall (IEC 60068-2-32)
Vibration (IEC 60068-2-6)
Warranty
3 year limited
Package Contents
TI-F11SFP
Quick Installation Guide
Removable terminal block
DIN-rail / wall mount kit
Updated: 9/24/2015
TI-F11SFP
20675 Manhattan Place Torrance CA 90501 USA T: 1-888-326-6061 F: 1-310-961-5511 sales@trendnet.com www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most
recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.