Datasheet

FEATURES
SPECIFICATIONS
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• IEEE 802.3x
Device Interface
• 5 x Fast Ethernet ports
• 4-pin removable terminal block
• LED indicators
• Wall mount
• DIN-Rail mount
• Grounding point
Data Transfer Rate
• Ethernet: 10Mbps (half duplex), 20Mbps (full
duplex)
• Fast Ethernet: 100Mbps (half duplex),
200Mbps (full duplex)
Performance
• Data RAM Buffer: 56KB (change unit of
measure)
• Switching Fabric: 1Gbps
• MAC Address Table: 1K entries
• Forwarding rate: 0.744Mpps (64-byte packet
size)
Special Features
• Hardened components rated for extreme
temperatures
• Redundant power inputs
• ESD 8kV support
• Low-profile design
DC Power
• Input: 12 – 56V DC
• Recommended power supply: TI-M6024 (sold
separately)
• Max. consumption: 2.24W
Terminal Block
• Redundant power inputs, 4-pin
• Wire range: 0.34mm^2 to 2.5mm^2
• Solid wire (AWG): 12-24/14-22
• Stranded wire (AWG): 12-24/14-22
• Torque: 5 lb. – in. / 0.5Nm / 0.56Nm
• Wire strip length: 7-8mm
MTBF
• 510,304 hours
Housing
• IP30 metal case
• DIN-Rail mount
• Wall mount
• Grounding point
Operating Temperature
• - 40° – 75° C (-40° – 167° F)
Operating Humidity
• Max. 95% non-condensing
Dimensions
• 104 x 82 x 32mm (4 x 3.2 x 1.25 in.)
Weight
• 486g (17.1 oz.)
Certifications
• CE
• FCC
• Shock (IEC 60068-2-27)
• Freefall (IEC 60068-2-32)
• Vibration (IEC 60068-2-6)
• IEC 61000-4-2
• IEC 61000-4-4
• IEC 61000-4-5
Warranty
• Lifetime
Package Contents
• TI-E50
• Quick Installation Guide
• Removable terminal block
• DIN-Rail and wall mount kit
TRENDnet offers a lifetime warranty for all of its metal-enclosed network switches that have been purchased in the United States/Canada on or after 1/1/2015. Cooling fan and internal power supply carry a one-year
warranty.
Easy Installation
Industrial Ethernet switches feature a
quick and easy installation process
with an intuitive guided setup
DIN-Rail / Wall Mounts
IP30 rated metal enclosure with DIN-
Rail mount and wall mount hardware
included
Redundant Power
Dual power inputs provide redundant
power with overload current protection
(power supply sold separately, model:
TI-M6024)
Wide Temperature Range
A wide operating temperature range of
-40° – 75° C (-40° – 167° F) allows for
installations in industrial environments
with extreme hot or cold conditions
Shock and Vibration Resistant
Rated for shock (EN 60068-2-27),
freefall (EN 60068-2-32), and vibration
(EN 60068-2-6)
Electro Magnetic Compliance
Complies with industrial EMS
certifications (IEC 61000-4-2) ESD:
Contact: 6kV | Air: 8kV, (IEC
61000-4-4) EFT: Power: 2kV | Signal:
2kV, (61000-4-5) Surge: Power: 2kV |
Signal: 2kV
Grounding Point
Grounding point on each industrial
Ethernet switch designed to protect
equipment from external electrical
surges
TI-E50
20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • [e-mail] • www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at
any time, without notice. For the most recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.
Updated: 9/17/2019
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.