Datasheet

FEATURES
SPECIFICATIONS
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3x
• IEEE 802.3ab
• IEEE 802.3af
• IEEE 802.3at
Device Interface
• 1 x Gigabit PoE+ in port
• 1 x Gigabit PoE+ out port
• LED indicators
• DIN-Rail mount
• Wall mount
• Grounding point
Data Transfer Rate
• Ethernet: 10Mbps (half duplex), 20Mbps (full
duplex)
• Fast Ethernet: 100Mbps (half duplex),
200Mbps (full duplex)
• Gigabit: 2000Mbps (full duplex)
Performance
• Data RAM Buffer: 128KB
• MAC Address Table: 2K
• Jumbo Frame: 9KB
Special Features
• Extends a PoE/PoE+ network connection an
additional 100 meters
• Cascade up to 2 units for a total distance of up
to 300m (984 ft.) @50V power input
• Cascade up to 3 units for a total distance of up
to 400m (1312 ft.) @56V power input
• ESD Contact 6kV/Air 8kV and Surge 2kV
protection
PoE
• Power input: 15.4W/30W/60W
• Power output: 15.4W/30W
• Max. consumption: 3.5W (no PoE)
Housing
• IP30 metal case
• DIN-Rail mount
• Wall mount
• Grounding point
• Contact 6kV, Air 8kV ESD protection
• 2kV surge protection
Operating Temperature
• - 40° — 75° C (-40° — 167° F)
Operating Humidity
• Max. 90% non-condensing
Dimensions
• 103 x 80 x 32mm (4 x 3.1 x 1.25 in.)
Weight
• 158g (5.6 oz.)
Certifications
• CE
• FCC
• IEC EN60950-1
• Shock (IEC 60068-2-27)
• Freefall (IEC 60068-2-32)
• Vibration (IEC 60068-2-6)
Warranty
• 3-year
Package Contents
• TI-E100
• Quick Installation Guide
• DIN-Rail and wall mount kit
Extension Distance
Extends a PoE/PoE+ network
connection an additional 100m for a
total distance of up to 200m (656 ft.)
from the PoE power source equipment
PoE/PoE+
Auto-sensing technology conveniently
delivers the correct wattage needed to
power your PoE (15.4W) or PoE+
(30W) device
Gigabit Ports
The industrial PoE+ extender features
one gigabit PoE+ input port and one
gigabit PoE+ output port
PoE Powered
No external power required—saves on
cost installation time
Daisy-Chain
Connect up to two TI-E100 industrial
PoE+ extenders for a total PoE+
network extension of up to 300m (984
ft.)
Industrial Grade Design
Built for harsh environments, with an
IP30 enclosure rating, and a wide
operating temperature range of -40°–
75° C (-40° – 167° F)
LED Indicators
LED indicators to convey status
20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • [e-mail] • www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at
any time, without notice. For the most recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.
Updated: 12/9/2019
TI-E100
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.