Quick Installation Guide 1000Base-SX/LX Fiber Converters
Table of Contents Table of Contents English ...................................................................................................... 1 1. Before You Start ................................................................................. 1 2. Hardware Installation ......................................................................... 2 Spefications .............................................................................................. 4 Ordering Information............................
1. Before You Start Package Contents Fiber Converter Quick Installation Guide AC Power Supply (7.5 DC, 1.
2. Hardware Installation Installing two stand alone Fiber Converters 1. Connect the fiber cable to the fiber converters. This cable must be multi-mode for the TFC-1000MSC. This cable must be single-mode for the TFC-1000S20/S50/S70/S10D3/ S10D5. 2. Connect an RJ-45 Ethernet cable from the Ethernet port on the fiber converters to an Ethernet port on your switch (e.g TEG-S160TX or TEG-S240TX). 3. Connect the power adapter to the back of the fiber converter.
Installing Media Converter in a Chassis 4. Unscrew the bay cover from the desired bay on the chassis. 5. Unfasten the thumbscrew and remove the fiber converter from the metal casing. 6. Slide the media converter into an available slot and fasten the thumbscrew. Your installation is now complete. Register Your Product To ensure the highest level of customer service and support, please take a moment to register your product Online at: www.trendnet.
Specifications Applicable Standards: IEEE802.3ab 1000BASE-TX IEEE802.3z 1000BASE-SX/LX Fixed Ports: Forwarding rate: 1 TX port, 1 FX port 1488000pps for 1000Mbps LED Indicators: PWR, LNK/ACT DIP Switches: Switch 1: On(Forced Mode); Off(Auto-Negotiation) Switch 2: On(LLR enabled); Off(LLR disabled) 1000BASE-T Cat. 5e or Cat. 6 EIA/TIA-568 100-ohm screened twisted-pair (STP) Cable : 1000BASE-SX 62.
Ordering Information Media Converters RJ-45 Port Model Number Fiber Port Speed (Mbps) Cable/Connector Max. Distance Speed (Mbps) Wavelength TFC-1000MSC 1000 Cat. 5E, 6 EIA/TIA-568 100-ohm STP 100M 1000 1300nm MMF 62.5/125µm (50µm or 62.5µm ) 550M SC 50/125µm TFC-1000S20 1000 Cat. 5E, 6 EIA/TIA-568 100-ohm STP 100M 1000 1300nm SMF (10µm ) SC 20 km TFC-1000S50 1000 Cat. 5E, 6 EIA/TIA-568 100-ohm STP 100M 1000 1300nm SMF (10µm ) SC 50 km TFC-1000S70 1000 Cat.
Troubleshooting Q1: After connecting the Fiber converter, the LEDs do not turn on. What should I do? A1: First, check that the power outlet is receiving power. Second, make sure the power adapter is firmly connected to the Fiber converter and the power outlet. Third, make sure the Ethernet and the Fiber cables are connected. Q2: All the LEDs are on, but I can't make a connection. What should I do? A2: First, verify that you are using the proper fiber cable (e.g.
Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. Fiber Converters 5 Year Limited Warranty If a product does not operate as warranted above during the applicable warranty period, TRENDnet shall, at its option and expense, repair the defective product or deliver to customer an equivalent product to replace the defective item.
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT TRENDNET’S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local Authority or Retailer for recycling advice.
Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com/register 20675 Manhattan Place Torrance, CA 90501 USA Copyright ©2009. All Rights Reserved. TRENDnet.
