User's Manual
Table Of Contents
- Product Overview
- Router Setup
- Basic Router Settings
- Wireless Networking and Security
- Advanced Router Settings
- Change your router login password
- Manually configure your Internet connection
- IPv6 Settings
- Clone a MAC address
- Change your router IP address
- Set up the DHCP server on your router
- Set up DHCP reservation
- Enable/disable UPnP on your router
- Enable/disable Application Layer Gateways (ALG)
- Allow/deny multicast streaming
- Identify your network on the Internet
- Set your router date and time
- Create schedules
- Access Control (IP Protocol Filter)
- Inbound Filter
- Open a device on your network to the Internet
- Virtual Server
- Allow remote access to your router management page
- Using External USB Storage
- Virtual Private Networking (VPN)
- Router Maintenance & Monitoring
- Reset your router to factory defaults
- Router Default Settings
- Backup and restore your router configuration settings
- Reboot your router
- Upgrade your router firmware
- Allow/deny ping requests to your router from the Internet
- How to capture network packets
- Diagnostic Tools
- Ping Watchdog
- Auto Reboot
- Wireless Client List
- Check the router system information
- View your router log
- Router Management Page Structure
- Technical Specifications
- Appendix
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-827DRU
59
Backup and restore your router configuration settings
Advanced > Administrator > Settings Management
You may have added many customized settings to your router and in the case that you
need to reset your router to default, all your customized settings would be lost and
would require you to manually reconfigure all of your router settings instead of simply
restoring from a backed up router configuration file.
To backup your router configuration:
1. Log into your router management page (see “
Access your router management page”
on page 10).
2. Click on Advanced and click on Administrator, then click on Settings Management.
3. Next to Export Settings section and Export, click Export.
4. Depending on your web browser settings, you may be prompted to save a file (specify
the location) or the file may be downloaded automatically to the web browser
settings default download folder. (Default Filename: TEW-827DRU_config.bin)
To restore your router configuration:
1. Log into your router management page (see “
Access your router management page”
on page 10).
2. Click on Advanced and click on Administrator, then click on Settings Management.
3. Next to Import Settings section and Settings File Location, click Browse.
4. A separate file navigation window should open.
5. Select the router configuration file to restore and click Import. (Default Filename:
TEW-827DRU_config.bin). If prompted, click Yes or OK.
6. Wait for the router to restore settings.
Reboot your router
Advanced > Administrator > Settings Management
You may want to restart your router if you are encountering difficulties with your router
and have attempted all other troubleshooting.
There are two methods that can be used to restart your router.
Turn the router off for 10 seconds using the router On/Off switch located on the
rear panel of your router or disconnecting the power port, see “
Product
Hardware Features” on page 2.
Use this method if you are encountering difficulties with accessing your router
management page. This is also known as a hard reboot or power cycle.
OR
Router Management Page – This is also known as a soft reboot or restart.
1. Log into your router management page (see “
Access your router management page”
on page 10).
2. Click on Advanced and click on Administrator, then click on Settings Management.
3. Next to System Reboot, click Reboot.
4. Wait for the device to reboot.