User's Manual
Table Of Contents
- Product Overview
- Router Setup
- Basic Router Settings
- Wireless Networking and Security
- Advanced Router Settings
- Change your router login password
- Manually configure your Internet connection
- IPv6 Settings
- Clone a MAC address
- Change your router IP address
- Set up the DHCP server on your router
- Set up DHCP reservation
- Enable/disable UPnP on your router
- Enable/disable Application Layer Gateways (ALG)
- Allow/deny multicast streaming
- Identify your network on the Internet
- Set your router date and time
- Create schedules
- Access Control (IP Protocol Filter)
- Inbound Filter
- Open a device on your network to the Internet
- Virtual Server
- Allow remote access to your router management page
- Using External USB Storage
- Virtual Private Networking (VPN)
- Router Maintenance & Monitoring
- Reset your router to factory defaults
- Router Default Settings
- Backup and restore your router configuration settings
- Reboot your router
- Upgrade your router firmware
- Allow/deny ping requests to your router from the Internet
- How to capture network packets
- Diagnostic Tools
- Ping Watchdog
- Auto Reboot
- Wireless Client List
- Check the router system information
- View your router log
- Router Management Page Structure
- Technical Specifications
- Appendix
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-827DRU
3
Product Hardware Features
Rear View
No
Item
Description
1
USB 3.0 Port
Connect USB storage devices to share over the
network via FTP or Windows® SMB/CIFS, Samba,
BitTorrent client, iTunes Server, and DLNA server.
2
Gigabit LAN Ports 1-4
(Black)
Connect Ethernet cables (also called network cables)
from your router LAN ports to your wired network
devices.
3
Gigabit WAN/Internet
Port
(Yellow)
Connect an Ethernet cable from your router Internet
port to your modem.
4
WPS Button (Wi-Fi
Protected Setup)
Push and hold this button for 3 seconds and release to
activate WPS. The Power LED on front panel will blink
when WPS is activated.
5
On/Off Power Switch
Push the router On/Off power switch to turn your
router “On” (Inner position) or “Off” (Outer position).
6
Power Port
Connect the included power adapter from your router
power port and to an available power outlet.
7
Reset Button
Using a pen or paperclip, push and hold the reset
button for 15 seconds and release to reset the router.