User's Manual
Table Of Contents
- Product Overview
- Router Setup
- Basic Router Settings
- Wireless Networking and Security
- Advanced Router Settings
- Change your router login password
- Manually configure your Internet connection
- IPv6 Settings
- Clone a MAC address
- Change your router IP address
- Set up the DHCP server on your router
- Set up DHCP reservation
- Enable/disable UPnP on your router
- Enable/disable Application Layer Gateways (ALG)
- Allow/deny multicast streaming
- Identify your network on the Internet
- Set your router date and time
- Create schedules
- Access Control (IP Protocol Filter)
- Inbound Filter
- Open a device on your network to the Internet
- Virtual Server
- Allow remote access to your router management page
- Using External USB Storage
- Virtual Private Networking (VPN)
- Router Maintenance & Monitoring
- Reset your router to factory defaults
- Router Default Settings
- Backup and restore your router configuration settings
- Reboot your router
- Upgrade your router firmware
- Allow/deny ping requests to your router from the Internet
- How to capture network packets
- Diagnostic Tools
- Ping Watchdog
- Auto Reboot
- Wireless Client List
- Check the router system information
- View your router log
- Router Management Page Structure
- Technical Specifications
- Appendix
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-827DRU
51
BitTorrent Client Settings
Advanced > USB > BitTorrent
The router has an integrated BitTorrent client that can be used for downloading torrents
directly to the external USB storage device connected to one of the router's USB ports.
You can set parameters such as the maximum upload/download speeds, peer number,
and connection port.
1. Log into your router management page (see “
Access your router management page”
on page 10).
2. Click on Advanced and click on USB, then click on BitTorrent.
3. Click the Status drop-down list and select Enable. Then click Apply.
4. This page allows you to configure the maximum bandwidth limits, seeding ratio, max
peer number and peer number for peers, connection port, and enable/disable
encryption. After you have completed your configuration changes click Apply. Commit
your changes to the router by clicking on Apply/Discard Changes in the left-hand menu,
and click Apply & Reboot.
5. After you have configured your client settings. Click Download Manager at the top of
the page to manage your torrent downloads.
6. You can add new torrent files to the list under Upload Torrent by clicking Browse, and
navigating to the location of the torrent file and selecting it. Once you have selected the
torrent file, click Add to add the torrent to your download list.
Note: You can continue to add more torrent downloads by clicking Browse and selecting
each file one at a time.
7. The torrent download list will allow you to Start All or Stop All downloads. The Action
section will allow you to delete or remove the specified torrent download.
Note: You can click the Settings button at the top to return to the router management
page.