User's Manual
Table Of Contents
- Product Overview
- Router Setup
- Basic Router Settings
- Wireless Networking and Security
- Advanced Router Settings
- Change your router login password
- Manually configure your Internet connection
- IPv6 Settings
- Clone a MAC address
- Change your router IP address
- Set up the DHCP server on your router
- Set up DHCP reservation
- Enable/disable UPnP on your router
- Enable/disable Application Layer Gateways (ALG)
- Allow/deny multicast streaming
- Identify your network on the Internet
- Set your router date and time
- Create schedules
- Access Control (IP Protocol Filter)
- Inbound Filter
- Open a device on your network to the Internet
- Virtual Server
- Allow remote access to your router management page
- Using External USB Storage
- Virtual Private Networking (VPN)
- Router Maintenance & Monitoring
- Reset your router to factory defaults
- Router Default Settings
- Backup and restore your router configuration settings
- Reboot your router
- Upgrade your router firmware
- Allow/deny ping requests to your router from the Internet
- How to capture network packets
- Diagnostic Tools
- Ping Watchdog
- Auto Reboot
- Wireless Client List
- Check the router system information
- View your router log
- Router Management Page Structure
- Technical Specifications
- Appendix
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-827DRU
15
Parental Control
Basic > Parental Control
Parental control settings allow you to set up restrictions/filters specifically who is
allowed or denied access to your network for a specified period of time and restricted
access to web content.
Access Rule (MAC/IP Filter)
Basic > Parental Control
Every network device has a unique, 12-digit MAC (Media Access Control) address. Every
network device must be assigned or configured with a specific IP address in order to
communicate with your network which is typically assigned by your router DHCP server
automatically. Using access rules, you can deny specific computers and other devices
from using this router’s wired or wireless network by specifying the MAC address or IP
address.
1. Log into your router management page (see “Access your router management page”
on page 10).
2. Click on Basic, click on Parental Control.
3. Check Enable to enable the access rule.
4. Enter a Computer Name.
Note: If the network device is connected to your router, you can also click the drop-down
list to choose one of the network devices (MAC Address/IP Address) detected by your
router.
5. Select which Address Type to apply the filter. (MAC Address or IP Address)
Note: If you device is not listed, please refer to your computer or device documentation
to find the MAC address.
6. If the MAC or IP address was not copied by selecting the Host Name from the drop-
down list in Step 4, manually enter the MAC Address or IP Address in the field.
Otherwise, move on to the next step.
7. Schedule – The schedule function allows you to define a schedule when the access
should be allowed for the specified device MAC address or IP address. To define a new
schedule, in the Schedule section, click Define and a table will appear to define the time
slots when access is allowed for that specific device MAC or IP address. Note: Before
defining a schedule, please ensure your Time settings are configured correctly. See page
38 to configure
Time Settings.