User's Manual
Table Of Contents
- Product Overview
- Router Setup
- Basic Router Settings
- Wireless Networking and Security
- Advanced Router Settings
- Change your router login password
- Manually configure your Internet connection
- IPv6 Settings
- Clone a MAC address
- Change your router IP address
- Set up the DHCP server on your router
- Set up DHCP reservation
- Enable/disable UPnP on your router
- Enable/disable Application Layer Gateways (ALG)
- Allow/deny multicast streaming
- Identify your network on the Internet
- Set your router date and time
- Create schedules
- Access Control (IP Protocol Filter)
- Inbound Filter
- Open a device on your network to the Internet
- Virtual Server
- Allow remote access to your router management page
- Using External USB Storage
- Virtual Private Networking (VPN)
- Router Maintenance & Monitoring
- Reset your router to factory defaults
- Router Default Settings
- Backup and restore your router configuration settings
- Reboot your router
- Upgrade your router firmware
- Allow/deny ping requests to your router from the Internet
- How to capture network packets
- Diagnostic Tools
- Ping Watchdog
- Auto Reboot
- Wireless Client List
- Check the router system information
- View your router log
- Router Management Page Structure
- Technical Specifications
- Appendix
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-827DRU
14
Internet Access Only – When this option is checked, wireless client devices
connected to your guest network(s) will be restricted from accessing your private
LAN and wireless clients connected to your primary wireless network and allowed
Internet access only. If unchecked, allows wireless client devices connected your
guest network(s) complete access to your private LAN, primary wireless network,
and Internet.
Wireless Client Isolation – When this option is checked, wireless client devices
connected to your guest network(s) will be restricted from accessing other client
devices connected to your guest
network(s).
4. Under Security Mode, you can apply a different wireless security type and key to the
guest network. Please refer to page 18 to find out about different security types and
page 19 for wireless security configuration.
Security Mode – Select the wireless security to use for the guest network.