1. Before You Start Package Contents ~TEW-805UBH «Quick Installation Glued +CD-ROM (Driver & User's Guide) Minimum Requirements »Computer with USB 2.0 port or higher «Operating System Compatibility: «Windows® ~Mac 0S® 10.
2. Windows® 0S Installation 1. Insert the Included CD-ROM Into your computer's CD-ROM drive. Mote: I you do not have 2 CD-ROM drive, you can download the drivers from 2. At the CD Auto run Prompt window, click Run Autoworker. Site: I the Auto run prompt does not appear automatically, open the CD controverts and double-click Autoworker. 3. At the CD-ROM man menu, click Install Driver.
4, Follow the Install Shield Wizard instructions and restart the computer once the Installation Is completes. After the computer has rebooted, plug the TEW-805UBH Into an available USB port en your computer. 5. Click on the wireless con In the taskbar located In the bottom right comer.
8. Select a wireless network, then enter the WiFi Key (password) and click Next. Eerie 1 notwork entry the The status will display “Connected” to indicate a successful connection. Note: If the connected message does not display, double check your WIA key (password) and re-enter It.
3. Mac® 08 Installation 1. Go to nonsupport to download the latest driver and double click to extract the files or you can access the files on the Included CD. Iota: Mini GD's can only be read by an optical tray, using an optical soot can damage your computer. 2. After you java extracted the fells, double click the instrumentality fail and follow the steps. After the Installation Is complete, you will be prompted to Restart.
4. After your computer has restarted, click on the wireless icon located In the menu bar at the top of your screen. ) 5. Select your wireless network.
6. Enter the WIF key {Password) and click Jon. R 7. After you have successfully connects to your network the Icon at the menu bar will change to the signal strength you have.
4, Après le redémarrage, cliquez sur Officine Wifi de la barre de menu au sommet de votre écran. D) 5. Sélectionnez votre réseau WIFI.
6. Indiquez la 4 WIF (Mot de passe) et fliquez sur Jon (Rejoindre). R 7. Présages vous être correctement connecte 2 votre réseau, ['ligne de la. barre de menu sera modifiée et indiquera I puissance du signal dort vous disposez. Remarque: Si le message de connexion ne s'affiche pas, revérifiez voire cié (Mot do passe) WIF] et Indiquez-le & nouveau.
