Quick Installation Guide TEW-MP1U
Table of Contents English ....................................................................................................................................................... 1 1. Before You Start ................................................................................................................................ 2. How to Install ..................................................................................................................................... 3.
1. Before You Start Package Contents ? TEW-MP1U ? Quick Installation Guide ? Utility CD-ROM ? Power Adapter (12V, 1A) System Requirements CD-ROM Drive ? ? CPU: 300Mhz or above/ 800Mhz or above (Windows Vista) ? Memory: 256MB RAM or above/ 512MB RAM or above (Window Vista) ? Windows 2000/XP/2003 Server/Vista (32bit) Note: 1. Do not perform the following unless instructed to do so: 1. Install the utility 2. Connect printer to printer server 3. Connect computer to Print Server 2.
2. How to install 1. Install the printer drivers to your computer. Then shutdown the printer and disconnect the printer from your computer. Note: Please refer to your printer's manual for printer installation instructions. 2. Connect the Power Adapter to the Print Server and then to a power outlet. 3. Connect a RJ-45 network cable from a Switch/Router to the LAN port of the Print Server. 4. Connect the USB Printer to the USB port of the Print Server. 5. Power ON printer. 6.
3. Configure the Print Server 1. Insert the Utility CD-ROM into your CD-ROM driver. Then click Setup Wizard. 2. Click Skip. 3. Select the print server and then click Next.
4. Choose a wireless network to connect to and then click Next. 5. Configure the IP address of the print server to be in the same subnet as your network and then click Next. 6. Click Finish.
. Click Yes. 8. Follow the InstallShield Wizard instructions and then click Finish. 9. Click on Resource and then click Connect. 10. The printer driver wizard appears. Follow the printer driver wizard to install the printer.
11. Click OK. Print Server configuration is now complete. For detailed information regarding the TEW-MP1U configuration and advanced settings, please refer to the User's Guide on the Utility CD-ROM or TRENDnet's website at www.trendnet.com Register Your Product To ensure the highest level of customer service and support, please take a moment to register your product Online at: www.TRENDnet.
4. Printing Note: Only one user can use the print server at a time. Once a user has finished using the print server, another user can use it. 1. Click on Resource and then click Connect. 2. Status will now show the client computer and IP address that is currently using the printer. 3. User can now start printing. 4. Click Disconnect.
5. Faxing Note: Only one user can use the print server at a time. Once a user has finished using the print server, another user can use it. 1. Click on Resource and then click Connect. 2. Status will now show the client computer and IP address that is currently using the printer. 3. User can now start Faxing. Follow the Multifunction printer software instructions for faxing. 4. Click Disconnect.
6. Scanning Note: Only one user can use the print server at a time. Once a user has finished using the print server, another user can use it. 1. Click on Resource and then click Connect. 2. Status will now show the client computer and IP address that is currently using the printer. 3. Place the document on the MultiFunction Printer's Scanner bed. Then follow the Multifunction printer software instructions for scanning. 4. Click Disconnect.
Troubleshooting Q1. The setup wizard/utility does not detect the Print Server and/or printer/storage device. What should I do? A1. First, double check your hardware connections; make sure that the Print Server and printer are powered ON and are properly connected. Make sure the RJ-45 network cable is securely connected to the Print Server and Switch/Router. Second, disable any software firewall programs such as ZoneAlarm or Norton Internet Security.
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local Authority or Retailer for recycling advice.
TRENDnet Technical Support US . Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support Europe (Germany . France . Italy . Spain . Switzerland UK) Toll Free Telephone: +00800 60 76 76 67 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Worldwide Telephone: +(31) (0) 20 504 05 35 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.
