Specification Sheet
Specifications
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3x
• IEEE 802.3ab
• IEEE 802.3az
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11g
• IEEE 802.11n (up to 800 Mbps @ 256QAM)*
• IEEE 802.11ac (up to 1733 Mbps)*
Hardware Interface
• 4 x Gigabit LAN ports
• 1 x Gigabit WAN port
• 1 x USB 3.0 (Storage FTP, Samba, iTunes® Media
Server, BitTorrent Client)
• Power switch
• WPS button
• Reset button
• LED indicators
Special Features
• Multi-User MIMO for increased bandwidth
efficiency and better user experience*
• Multi-Language interface: English, French,
Spanish, German, Russian, Portuguese
• Pre-encrypted wireless network
• IPv6 support
• 1 guest network per band with option for internet
access only
• Up to 2 additional SSIDs per band
• Dynamic DNS support for dyn.com, no-ip.com, and
easydns.com
• Samba/FTP server support
• Explicit Beamforming
Access Control
• Wireless encryption up to WEP, WPA/WPA2-PSK,
WPA/WPA2-RADIUS
• Firewall: NAT, SPI, Virtual Server, Special
Applications, Gaming, DMZ Host, allow/deny ping
request from internet
• ALG: PPTP/L2TP/IPsec VPN Passthrough, TFTP/
FTP/RTSP/SIP/H.323 Passthrough
• Parental (Access) Controls: MAC, URL, IP Filter
Quality of Service
• WMM
Internet Connection Types
• Dynamic IP (DHCP)
• Static IP (Fixed)
• PPPoE (Dynamic IP/Static IP)
• PPTP (Dynamic IP/Static IP)
• L2TP(Dynamic IP/Static IP)
• Russia PPPoE (Dynamic IP/Static IP)
• Russia PPTP (Dynamic IP/Static IP)
• Russia L2TP (Dynamic IP/Static IP)
• IPv6 (Static, Auto-configuration (SLAAC/DHCPv6),
Link-Local, PPPoE, 6to4)
Management/Monitoring
• Local/remote web based management
• Upgrade firmware
• Backup/restore configuration
• Internal logging
• Reboot & scheduled automatic reboot
• Ping watchdog
• Restore to factory defaults
• Ping test
Routing
• Static
• Dynamic (RIP v1/2)
Frequency
• 2.412 - 2.472 GHz
• 5.180 – 5.825 GHz
Modulation
• 802.11b: CCK, DQPSK, DBPSK
• 802.11a/g: OFDM with BPSK, QPSK and 16/
64-QAM
• 802.11n: BPSK, QPSK, 16-QAM, 64-QAM with
OFDM
• 802.11ac: OFDM with BPSK, QPSK and 16/64/
256-QAM
Media Access Protocol
• CSMA/CA with ACK
Antenna Gain
• 2.4 GHz: 4 x 3 dBi (max.) detachable/external; 5
GHz: 4 x 5 dBi
Wireless Output Power (max output power without
antenna gain)
• 802.11a: FCC: 26 dBm (max.) / ETSI: 22 dBm
(max.) / IC: 26 dBm (max.)
• 802.11b: FCC: 27 dBm (max.) / ETSI: 15 dBm
(max.) / IC: 27 dBm (max.)
• 802.11g: FCC: 25 dBm (max.) / ETSI: 16 dBm
(max.) / IC: 25 dBm (max.)
• 802.11n (2.4 GHz): FCC: 25 dBm (max.) / ETSI: 16
dBm (max.) / IC: 25 dBm (max.)
• 802.11n (5 GHz): FCC: 25 dBm (max.) / ETSI: 23
dBm (max.) / IC: 25 dBm (max.)
• 802.11ac: FCC: 25 dBm (max.) / ETSI: 24 dBm
(max.) / IC: 25 dBm (max.)
Receiving Sensitivity (per chain)
• 802.11a: -70 dBm (typical) @ 54 Mbps
• 802.11b: -83 dBm (typical) @ 11 Mbps
• 802.11g: -70 dBm (typical) @ 54 Mbps
• 802.11n (2.4 GHz): -59 dBm (typical) @ 800 Mbps
• 802.11n (5 GHz): -59 dBm (typical) @ 800 Mbps
• 802.11ac: -55 dBm (typical) @ 1733 Mbps
Wireless Channels
• 2.4 GHz: FCC: 1-11; ETSI: 1-13
• 5 GHz: FCC: 36, 40, 44, 48, 149, 153, 157, 161,
165; ETSI: 36, 40, 44, 48, (52, 56, 60, 64, 100, 104,
108, 112, 116, 132, 136, 140)**
Power
• Input: 100 – 240 V AC, 50 - 60 Hz
• Output: 12V DC, 1.5A external power adapter
• Consumption: 17.4W (max.)
Operating Temperature
• 0 – 40 °C (32 – 104 °F)
Operating Humidity
• Max. 95% non-condensing
Certifications
• CE
• FCC
• IC
Dimensions
• 250 x 180 x 45 mm (9.8 x 7.1 x 1.8 in.)
Weight
• 612 g (21.6 oz.)
Warranty
• 3 year
Package Contents
• TEW-827DRU
• Quick Installation Guide
• CD-ROM (User’s Guide)
• 4 x Detachable high gain antennas
• Network cable (1.5 m/5 ft.)
• Power adapter (12V DC, 1.5 A)
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions. For
maximum performance of up to 1.733 Gbps use with a 1.733 Gbps 802.11ac wireless adapter. For maximum performance of up to 800 Mbps, use with an 800 Mbps 802.11n wireless adapter. Multi-User MIMO (MU-MIMO)
requires the use of multiple MU-MIMO enabled wireless adapters.
**Due to regulatory requirements, the wireless channels specified cannot be statically assigned, but will be available within the available wireless channels when set to auto.
Updated: 8/28/2017
TEW-827DRU
20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • sales@trendnet.com • www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most
recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.