Data Sheet

Specifications
Standards
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3ab
IEEE 802.3az
IEEE 802.11a
IEEE 802.11b
IEEE 802.11g
IEEE 802.11n (up to 800 Mbps)*
IEEE 802.11ac (up to 1733 Mbps)*
Hardware Interface
4 x Gigabit LAN ports
1 x Gigabit WAN port
2 x USB 3.0 (Storage FTP, Samba, iTunes® Media
Server, BitTorrent Client)
Power switch
WPS button
Reset button
WiFi on/off
LED on/off
LED indicators
Special Features
StreamBoost™ automatically identifies and
classifies network traffic to maximize bandwidth
and speed***
Multi-User MIMO for increased bandwidth
efficiency and better user experience*
Multi-Language interface: English, French,
Spanish, German, Russian
Pre-encrypted wireless network
IPv6 support
1 guest network per band with option for internet
access only
Up to 2 additional SSIDs per band
Dynamic DNS support for dyn.com, no-ip.com, and
easydns.com
Samba/FTP server support
Implicit and Explicit Beamforming
Access Control
Wireless encryption up to WEP, WPA/WPA2-PSK,
WPA/WPA2-RADIUS
Firewall: NAT, SPI, Virtual Server, Special
Applications, Gaming, DMZ Host, allow/deny ping
request from internet
ALG: PPTP/L2TP/IPsec VPN Passthrough, TFTP/
FTP/RTSP/SIP/H.323 Passthrough
Parental (Access) Controls: MAC, URL, IP Filter
Quality of Service
WMM
StreamBoost™ Traffic Shaping***
Internet Connection Types
Dynamic IP (DHCP)
Static IP (Fixed)
PPPoE (Dynamic IP/Static IP)
PPTP (Dynamic IP/Static IP)
L2TP(Dynamic IP/Static IP)
Russia PPPoE (Dynamic IP/Static IP)
Russia PPTP (Dynamic IP/Static IP)
Russia L2TP (Dynamic IP/Static IP)
IPv6 (Static, Auto-configuration (SLAAC/DHCPv6),
Link-Local, PPPoE, 6to4)
Management/Monitoring
Local/remote web based management
Upgrade firmware
Backup/restore configuration
Internal logging
Reboot
Restore to factory defaults
Ping test
Routing
Static
Dynamic (RIP v1/2)
Frequency
2.412 – 2.472 GHz
5.180 – 5.825 GHz
Modulation
802.11b: CCK, DQPSK, DBPSK
802.11a/g: OFDM with BPSK, QPSK and 16/
64-QAM
802.11n: BPSK, QPSK, 16-QAM, 64-QAM with
OFDM
802.11ac: OFDM with BPSK, QPSK and 16/64/
256-QAM
Media Access Protocol
CSMA/CA with ACK
Antenna Gain
2.4 GHz: 4 x 3 dBi (max.) detachable/external; 5
GHz: 4 x 5 dBi
Wireless Output Power (max output power without
antenna gain)
802.11a: FCC: 26 dBm (max.) / ETSI: 29 dBm
(max.) / IC: 26 dBm (max.) @ 54 Mbps
802.11b: FCC: 27 dBm (max.) / ETSI: 14 dBm
(max.) / IC: 27 dBm (max.) @ 11 Mbps
802.11g: FCC: 29 dBm (max.) / ETSI: 16 dBm
(max.) / IC: 29 dBm (max.) @ 54 Mbps
802.11n (2.4 GHz): FCC: 29 dBm (max.) / ETSI: 16
dBm (max.) / IC: 29 dBm (max.) @ 800 Mbps
802.11n (5 GHz): FCC: 27 dBm (max.) / ETSI: 28
dBm (max.) / IC: 26 dBm (max.) @ 800 Mbps
802.11ac: FCC: 27 dBm (max.) / ETSI: 28 dBm
(max.) / IC: 26 dBm (max.) @ 1733 Mbps
Receiving Sensitivity
802.11a: -68 dBm (typical) @ 54 Mbps
802.11b: -83 dBm (typical) @ 11 Mbps
802.11g: -70 dBm (typical) @ 54 Mbps
802.11n (2.4 GHz): -64 dBm (typical) @ 800 Mbps
802.11n (5 GHz): -68 dBm (typical) @ 800 Mbps
802.11ac: -55 dBm (typical) @ 1733 Mbps
Wireless Channels
2.4 GHz: FCC: 1-11; ETSI: 1-13
5 GHz: FCC: 36, 40, 44, 48, 149, 153, 157, 161,
165; ETSI: 36, 40, 44, 48, (52, 56, 60, 64, 100, 104,
108, 112, 116, 132, 136, 140)**
Power
Input: 100 – 240 V AC, 50 – 60 Hz, 1 A
Output: 12V DC, 3 A external power adapter
Consumption: 31 Watts max.
Operating Temperature
0 – 40 °C (32 – 104 °F)
Operating Humidity
Max. 95% non-condensing
Certifications
CE
FCC
Dimensions
250 x 180 x 45 mm (9.8 x 7.1 x 1.8 in.)
Weight
752 g (26.5 oz.)
Warranty
3 year limited
Package Contents
TEW-827DRU
Quick Installation Guide
CD-ROM (User’s Guide)
4 x Detachable high gain antennas
Network cable (1.5 m/5 ft.)
Power adapter (12V DC, 3 A)
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions. For
maximum performance of up to 1.733 Gbps use with a 1.733 Gbps 802.11ac wireless adapter. For maximum performance of up to 800 Mbps, use with an 800 Mbps 802.11n wireless adapter. Multi-User MIMO (MU-MIMO)
requires the use of multiple MU-MIMO enabled wireless adapters.
** Due to regulatory requirements, the wireless channels specified cannot be statically assigned, but will be available within the available wireless channels when set to auto.
***Qualcomm
®
StreamBoost
is a trademark of Qualcomm Atheros, Inc.
Updated: 12/15/2015
TEW-827DRU
20675 Manhattan Place Torrance CA 90501 USA T: 1-888-326-6061 F: 1-310-961-5511 sales@trendnet.com www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most
recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.