User's Guide
Table Of Contents
- Product Overview
- Getting Started
- Initial Setup
- Status
- System
- Wireless Networking and Security
- General Configuration
- Access Point
- Client Bridge
- WDS
- Repeater
- Management
- Administration
- Administrator Settings:
- Device Name Settings:
- Management VLAN
- SNMP Settings
- Backup/Restore Settings
- Export Settings (backup your configuration):
- Import Settings (restore from configuration):
- Reset to Factory Defaults
- System Reboot:
- Time and Date Settings
- Automatically set using NTP:
- Daylight Saving Time:
- NTP Settings:
- Date and Time Settings (manually set):
- SSH Management
- Log
- Diagnostics
- Ping Test Parameter:
- Traceroute Parameter:
- Download Technical Support Data:
- LED Control
- AP utility
- Technical Specifications
- Troubleshooting
- Appendix
© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-826DAP
55
Upgrade Firmware
1. Run the utility
2. Select the devices you want to conduct a firmware upgrade and click on FW
upgrade button
3. Click Browse button and navigate to the folder on your computer where the
unzipped firmware file (.bin) is located and select it to select the firmware
4. Enter the login password of the devices and click Upgrade to start the firmware
upgrade process.
Load configuration
1. Run the utility
2. Select the devices you want to conduct a configuration upgrade and click
Config Upgrade button
3. Click Browse button and navigate to the folder on your computer where the
unzipped firmware file (.bin) is located and select it to select the firmware
4. Enter the login password of the devices and click Upgrade to start the firmware
upgrade process.