User's Guide
Table Of Contents
- Product Overview
- Getting Started
- Initial Setup
- Status
- System
- Wireless Networking and Security
- General Configuration
- Access Point
- Client Bridge
- WDS
- Repeater
- Management
- Administration
- Administrator Settings:
- Device Name Settings:
- Management VLAN
- SNMP Settings
- Backup/Restore Settings
- Export Settings (backup your configuration):
- Import Settings (restore from configuration):
- Reset to Factory Defaults
- System Reboot:
- Time and Date Settings
- Automatically set using NTP:
- Daylight Saving Time:
- NTP Settings:
- Date and Time Settings (manually set):
- SSH Management
- Log
- Diagnostics
- Ping Test Parameter:
- Traceroute Parameter:
- Download Technical Support Data:
- LED Control
- AP utility
- Technical Specifications
- Troubleshooting
- Appendix
© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-826DAP
54
Separate Stations: Select this option to restrict wireless client devices from
accessing other client devices connected to this network(s).
Enable: Select this option to enable the selected wireless interface
Visible: Select this option to wireless broadcast the selected wireless
interface
SSID: Enter the SSID (Wireless Network Name) of the selected wireless
interface
Security: Select the wireless encryption security for to assign the selected
wireless interface
Key: Enter the wireless encryption security key or password
Password: Enter the login password of the device and click OK to save
settings
Add and Delete Device
Add device:
1. Run the utility
2. To add a device to control select the “+” on the upper right corner.
3. Enter the IP address of the device you would like to add to the controller and
press OK.
Delete Device:
1. Run the utility
2. To delete a device from the controller. Select the device from the listed devices
and click “-“ on the upper right corner.
3. Confirm the deletion of the device by pushing Ok.