User's Guide

TRENDnet User’s Guide

TEW-821DAP

AP utility

Installation

1. Download the latest version of the utility by navigating to

http://www.trendnet.com/support and selecting model TEW-821DAP within the

Product Download drop-down list.

2. Extract the contents of the .zip file and run the .exe installer to install the utility.

3. Once the utility is installed click on Discover to refresh the list of access points.

4. Select the access point you want to configure.

5. Click on Device settings to configure the access point.

Device Settings

 Product Name: Displays the device model

 IP Mode: Select the IP mode to apply on the device

o DHCP: Select this option to allow the device to receive IP address from your

DHCP server

o Static: Select this option to manually set the IP address of the device

 IP Address: Enter the IP address to assign to the device

 Subnet Mask: Enter the subnet mask to assign to the device

 Gateway: Enter the gateway IP address to assign to the device

 System Name: Assign name of the device to help distinguish between similar

devices

 VLAN ID: Assigns the VLAN ID for the Ethernet port.

 Band Steer: Select this to enable/disable band steering

 Band: Select on the pull-down menu the wireless interface to configure

 802.11 Mode: Select the 802.11 mode of the selected wireless interface

 Channel: Select the wireless channel of the selected wireless interface

 VLAN ID: Assigns the VLAN ID for the primary SSID.

 interface