User's Guide

TRENDnet User’s Guide

TEW-821DAP

 SSID: Manually enter the wireless network name (SSID) you want to establish

connection. Or simply click on Site Survey to scan for available wireless network

(more on this function in below section).

 Preferred BSSID: Click option and enter the MAC address of the preferred wireless

network you would like to connect to.

 Repeater SSID: You may specify a new SSID name to use

 Security Mode: Select from the pull-down menu the wireless security that is used

on the wireless network you would like to connect to.

6. Click on the Apply/Discard Changes button located on the top left section to save the

settings.

Scan for wireless networks

Wireless (2.4GHz or 5GHz) > Wireless Network

This section outlines the available features to configure for both wireless 2.4Ghz and

5GHz when Repeater mode is selected.

1. Log into your management page (see “Access the management page” on page 16).

2. Click on the wireless band you would like to configure and click Wireless Network.

3. Under SSID section click Site Survey to wireless scan for available wireless networks.

4. Click on the wireless network you would like to repeat. The information will

automatically fill on the previous screen. You will then need to select and enter the

wireless security.

5. Click on Save button to apply the settings and then click on the Apply/Discard

Changes button located on the top left section to save the settings.