User's Guide

TRENDnet User’s Guide

TEW-821DAP

Repeater

Basic

Wireless (2.4GHz or 5GHz) > Wireless Network

This section outlines the available features to configure for both wireless 2.4GHz and

5GHz when Repeater mode is selected.

1. Log into your management page (see “Access the management page” on page 13).

2. Click on System, and select Operation Mode.

3. Enable Repeater, under the wireless band (2.4GHz or 5GHz) you would like to connect

this access point to, then press Save. Please make sure that the selected band is

available on your network.

4. Click on the wireless band (Wireless 2.4GHz / Wireless 5GHz) you would like to

configure and click Wireless Network.

5. Configure the below settings and click Save to save settings.

 Wireless Mode: Select the wireless mode to set on the selected wireless band in

client bridge mode