User's Guide

TRENDnet User’s Guide

TEW-821DAP

3. Enable Client Bridge, under the wireless band (2.4GHz or 5GHz) you would like to

connect this access point to. Please make sure that the selected band is available on

your network.

4. Click Save to save your current settings.

5. On the left-hand side menu, click on the wireless band tab (Wireless 2.4GHz /

Wireless 5GHz) you would like to configure and click Wireless Network.

6. Configure the below settings and click Save and Apply/Discard Changes to save

settings.

 Wireless Mode: Select the wireless mode to set on the selected wireless band in

client bridge mode

 SSID: Manually enter the wireless network name (SSID) you want to establish

connection. Or simply click on Site Survey to scan for available wireless network

(more details below).

 Preferred BSSID: Click option and enter the preferred wireless network you would

like to connect to.

 Security Mode: Select from the pull-down menu the wireless security that is used

on the wireless network you would like to connect to.

Scan for wireless networks

Wireless (2.4GHz or 5GHz) > Wireless Network

This section outlines the available features to configure for both wireless 2.4Ghz and

5GHz when Client Bridge mode is selected.

1. Log into your management page (see “Access the management page” on page 13).

2. Click on the wireless band you would like to configure and click Wireless Network.