User's Guide

TRENDnet User’s Guide

TEW-821DAP

LED Controls

Management > LED Control

1. Log into your management page (see “Access the management page” on page 13).

2. Click on the Management tab and click LED Control.

3. Review the settings and click Save to save settings.

 Power LED: Select On to leave Power LED on or Off option to turn off.

 LAN LED: Select On to leave LAN LED on or Off option to turn off.

 2.4GHz LED: Select On to leave wireless 2.4GHz LED on or Off option to turn off.

 5GHz LED: Select On to leave wireless 5GHz LED on or Off option to turn off.

4. Click on the Save button to apply the settings and then click on the Apply/Discard

button located on the top left section to save the settings.

Client Bridge

Basic

Wireless (2.4GHz or 5GHz) > Wireless Network

This section outlines the available features to configure for both wireless 2.4GHz and

5GHz when Access Point mode is selected.

1. Log into your management page (see “Access the management page” on page 13).

2. Click on System, and select Operation Mode.