User's Guide

TRENDnet User’s Guide

TEW-821DAP

4. Select the access point you want to configure.

5. Click on Device settings to configure the access point.

 Product Name: Displays the device model

 IP Mode: Select the IP mode to apply on the device

o DHCP: Select this option to allow the device to receive IP address from your

DHCP server

o Static: Select this option to manually set the IP address of the device

 IP Address: Enter the IP address to assign to the device

 Subnet Mask: Enter the subnet mask to assign to the device

 Gateway: Enter the gateway IP address to assign to the device

 System Name: Assign name of the device to help distinguish between similar

devices

 VLAN ID: Assigns the VLAN ID for the Ethernet port.

 Band Steer: Select this to enable/disable band steering (Only available on dual

band AP models)

 Band: Select on the pull-down menu the wireless interface to configure (5GHz

only available on dual band AP models)

 802.11 Mode: Select the 802.11 mode of the selected wireless interface

 Channel: Select the wireless channel of the selected wireless interface

 VLAN ID: Assigns the VLAN ID for the primary SSID.

 Separate Stations: Select this option to restrict wireless client devices from

accessing other client devices connected to this network(s).

 Enable: Select this option to enable the selected wireless interface

 Visible: Select this option to wireless broadcast the selected wireless interface

 SSID: Enter the SSID (Wireless Network Name) of the selected wireless interface

 Security: Select the wireless encryption security for to assign the selected

wireless interface

 Key: Enter the wireless encryption security key or password

 Password: Enter the login password of the device and click OK to save settings