User Guide

© Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-821DAP
36
5. Click on Device settings to configure the access point.
Add and Delete Device
Add device
1. Run the utility
2. To add a device to control select the “+” on the upper right corner
3. Enter the IP address of the device you would like to add to the controller and press
OK.
Delete device
1. Run the utility
2. To delete a device from the controller. Select the device from the listed devices and
click “-“ on the upper right corner
3. Enter the IP address of the device you would like to add to the controller and press
OK.
Device Settings
 Product Name: Displays the device model
 IP Mode: Select the IP mode to apply on the device
o DHCP: Select this option to allow the device to receive IP address from your
DHCP server
o Static: Select this option to manually set the IP address of the device
 IP Address: Enter the IP address to assign to the device
 Subnet Mask: Enter the subnet mask to assign to the device
 Gateway: Enter the gateway IP address to assign to the device