User Guide

© Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-821DAP
29
 Enable: Check option to enable daylight savings
 Daylight Saving Offset: Select the offset amount for daylight savings to apply
 Start/End Time: Configure the start and end time of daylight savings.
4. Click on Save/Reload button located on the top left section to apply settings.
Manual
1. Manually set the date and time of the router by select the from the pull down menus.
Click Sync Time to synchronize with your computer’s current time.
 Year: Enter the year to Enable: Check option to enable NTP feature
 Server IP: Enter the NTP server IP address or domain to use.
 First Poll Frequency: Enter the initial time to check NTP
 Thereafter Frequency: Select the time of when the router will continue to check for
NTP updates.
4. Click on Save/Reload button located on the top left section to apply settings.
Manage VLAN
Management > Manage VLAN
1. Log into your management page (see “Access the management page” on page 16).
2. Click on the Management tab and click Management VLAN.
3. Review the settings and click Apply to save settings.
 Enable: Check box of the selected SSID to enable VLAN feature
 VID: Enter the VID to assign on the selected wireless network
 SSID: Displays the available SSID
 WiFI Security: Displays the wireless security type of the wireless network
 No VLAN Tag: Select this option to use no VLAN Tag
 Specified VLAN ID: Select this option and enter the assigned VLAN ID.
4. Click on Save/Reload button located on the top left section to apply settings.
Traffic Shaping
Management > Traffic Shaping
1. Log into your management page (see “Access the management page” on page 16).
2. Click on the Management tab and click Traffic Shaping.
3. Review the settings and click Apply to save settings.