User Guide

© Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-821DAP
25
3. Configure the below settings and click Apply to save settings.
 Wireless Mode: Select the wireless mode to set on the selected wireless band in
client bridge mode
 SSID: Manually enter the wireless network name (SSID) you want to establish
connection. Or simply click on Site Survey to scan for available wireless network.
 Preferred BSSID: Click option and enter the preferred wireless network you would
like to connect to.
 Security Mode: Select from the pull down menu the wireless security that is used
on the wireless network you would like to connect to.
4. Click on Save/Reload button located on the top left section to apply settings.
Scan for wireless networks
Wireless (2.4GHz or 5GHz) > Wireless Network
This section outlines the available features to configure for both wireless 2.4Ghz and
5GHz when Access Point mode is selected.
1. Log into your management page (see “Access the management page” on page 16).
2. Click on the wireless band you would like to configure and click Wireless Network.
3. Under SSID section click Site Survey to wireless scan for available wireless networks.
4. Click on the wireless network you would like to repeat. The information will
automatically fill on the previous screen. You will then need to select and enter the
wireless security.
5. Click on Save/Reload button located on the top left section to apply settings.