Quick Installation Guide

4. Mounting the Device

1. Remove the mounting plate from the TEW-821DAP.

2. Place the mounting plate on the wall or ceiling where the device will be located, and mark the

location of the screw holes. Ensure that the device has enough clearance to slide on and off the

mounting plate. If it is a non-PoE installation, ensure that your mounting location has access to

an electrical outlet.

3. Drill out the marked screw holes, and insert the plastic wall anchors into the screw holes.

4. Secure the mounting plate, using the screws that came with the device.

5. Place the TEW-821DAP on the mounting plate, and attach the network cable. If it is a non-PoE

installation, connect the power adapter.

Toll Free English Technical Support

US/Canada: 855-373-4741

Hours: Monday-Friday

7:00 AM- 6:00 PM, Pacific Standard Time.

After hours: 866-845-3673