User's Guide
Table Of Contents
- Product Overview
- Configuration
- Wireless Networking and Security
- Advanced configuration
- Access Point
- Basic
- Wireless Profile
- Wireless MAC filter
- Band Steering
- Airtime Fairness
- Roaming Support (802.11k)
- RSSI Scanner
- IPv6 Settings
- Static IPv6
- Auto Configuration (SLAAC/DHCPv6)
- Change your IP address
- Captive Portal
- Configure Spanning Tree
- Set date and time
- Daylight Saving Time
- NTP
- Manual
- Manage VLAN
- Traffic Shaping
- Enable SNMP
- Enable CLI
- LED Controls
- Client Bridge
- WDS
- Repeater
- Maintenance & Monitoring
- AP utility
- Technical Specifications
- Troubleshooting
- Appendix
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-821DAP
50
over the chart to view a current break-down of the total number of clients
connected to the selected SSID.
Clients by AP: Displays number of clients and traffic per access point.
Most Active Device: Displays the access point with the most activity in
comparison between other access points on the network.
Most Active SSID: Displays the SSID (wireless network name) with the most
amount of activity.
Clients (Total): Shows the number of clients currently connected onto the
access point. The unit of measurement (time) can be configured to show the
number of devices connected in the last 5 minutes, hours, or days
Traffic (MBytes): This displays the amount of throughput (upload, download,
all) that has been passed. This can be configured to display only upload,
download, or all.