User's Guide
Table Of Contents
- Product Overview
- Configuration
- Wireless Networking and Security
- Advanced configuration
- Access Point
- Basic
- Wireless Profile
- Wireless MAC filter
- Band Steering
- Airtime Fairness
- Roaming Support (802.11k)
- RSSI Scanner
- IPv6 Settings
- Static IPv6
- Auto Configuration (SLAAC/DHCPv6)
- Change your IP address
- Captive Portal
- Configure Spanning Tree
- Set date and time
- Daylight Saving Time
- NTP
- Manual
- Manage VLAN
- Traffic Shaping
- Enable SNMP
- Enable CLI
- LED Controls
- Client Bridge
- WDS
- Repeater
- Maintenance & Monitoring
- AP utility
- Technical Specifications
- Troubleshooting
- Appendix
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-821DAP
41
Reset Button: Located on the front panel of your router, (see “Product Hardware
Features” on page 5). Use this method if you are encountering difficulties with
accessing your router management page.
OR
Access Point Management Page
1. Log into your management page (see “Access the management page” on page 13.
2. Click on the Management tab and click Backup/Restore Settings.
3. Click Load Default. If prompted, click Yes or Ok.
Backup and restore your configuration settings
Management > Backup/Restore Settings
You may have added many customized settings to your router and in the case that you
need to reset your router to default, all your customized settings would be lost and
would require you to manually reconfigure all of your router settings instead of simply
restoring from a backed up router configuration file.
To back up your configuration:
1. Log into your management page (see “Access the management page” on page 13.
2. Click on the Management tab and click Backup/Restore Settings.
3. Click Export Settings.
4. Depending on your web browser settings, you may be prompted to save a file (specify
the location) or the file may be downloaded automatically to the web browser
settings default download folder. (Default Filename: config.bin)
5. Save the configuration file to location on your computer.
To restore your configuration:
1. Log into your management page (see “Access the management page” on page 13.
2. Click on the Management tab and click Backup/Restore Settings.
3. Under Import Settings, depending on your web browser, click on Browse or Choose
File. A separate file navigation window should open.
4. Navigate to the location of the router configuration file to restore.
(Default Filename: config.bin).
5. Select the router configuration file to restore. Enter the login password under
Encrypt Key and click Save.
(Default Filename: config.bin). If prompted, click Yes or OK.
6. Wait for the router to restore settings.
Restart access point
Management > Backup/Restore Settings
You may want to restart your access point if you are encountering difficulties with your
router and have attempted all other troubleshooting.
There are two methods that can be used to restart your access point.
Turn the router off disconnect the power adapter from the rear panel of your
router for 10 seconds and reconnect the power adapter, (see “Product Hardware
Features” on page 5).
Use this method if you are encountering difficulties with accessing your router
management page. This is also known as a hard reboot or power cycle.
OR
Router Management Page: This is also known as a soft reboot or restart.
1. Log into your management page (see “Access the management page” on page 13.
2. Click on the Management tab and click Backup/Restore Settings.
3. Click Reboot under System Reboot to restart the access point. If prompted, click yes
or OK.