User's Guide

© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-821DAP
30
3. Review the settings for both 2.4G and 5G profiles and click Apply to save settings.
 Enable: Check box of the selected SSID to enable VLAN feature
 VID: Enter the VID to assign on the selected wireless network
 SSID: Displays the available SSID
 WiFi Security: Displays the wireless security type of the wireless network
 No VLAN Tag: Select this option to use no VLAN Tag
 Specified VLAN ID: Select this option and enter the assigned VLAN ID.
4. Click on Apply button to apply the settings and then click on the Save/Reload
button located on the top left section to save the settings.
Traffic Shaping
Management > Traffic Shaping
1. Log into your management page (see “Access the management page” on page 13.
2. Click on the Management tab and click Wireless Traffic Shaping.
3. Review the settings for both wireless bands (2.4GHz and 5GHz) and click Apply to
save settings.
 Enable: Check box to enable traffic shaping of the selected wireless band
 Incoming Traffic: Enter your network’s inbound traffic limit
 Outgoing Traffic Limit: Enter your network’s outbound traffic limit for the selected
wireless band
 Total percentage: Enter the selected wireless band’s traffic percentage to assign
 SSID: Enter the SSID’s assigned traffic percentage allowed
4. Click on Save/Reload button located on the top left section to apply settings.
Enable SNMP
Management > SNMP Settings
SNMP (Simple Network Management Protocol) is a network management protocol used
to monitor (read) and/or manage (write) multiple network devices on a network. This
preconfigured external SNMP server.
1. Log into your management page (see “Access the management page” on page 13.
2. Click on the Management tab and click SNMP Settings.