User's Guide
Table Of Contents
- Product Overview
- Configuration
- Wireless Networking and Security
- Advanced configuration
- Access Point
- Basic
- Wireless Profile
- Wireless MAC filter
- Band Steering
- Airtime Fairness
- Roaming Support (802.11k)
- RSSI Scanner
- IPv6 Settings
- Static IPv6
- Auto Configuration (SLAAC/DHCPv6)
- Change your IP address
- Captive Portal
- Configure Spanning Tree
- Set date and time
- Daylight Saving Time
- NTP
- Manual
- Manage VLAN
- Traffic Shaping
- Enable SNMP
- Enable CLI
- LED Controls
- Client Bridge
- WDS
- Repeater
- Maintenance & Monitoring
- AP utility
- Technical Specifications
- Troubleshooting
- Appendix
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-821DAP
24
Next, specify the Authentication Timeout settings. This is the session time
period (minutes) which users are allowed to be logged in to your wireless
network. Once the time expires, users will automatically logged and will
need to log back in through the captive portal page again in order to
reconnect to your wireless network. It is recommended to set a value to
ensure authentication sessions are closed after a certain time period.
Setting the value to 0 minutes allows users to be authenticated and
connected to your captive portal WiFi network without any time
restrictions.
Click Save when you have completed these settings.
After your users authenticate and connect to your captive portal WiFi
network, you may want to redirect your users to a specific URL, address, or
website for advertisement purposes.
To enable this feature on your captive portal WiFi network, click the Redirect drop-
down and select Enable. Enter the URL/address/website in the field Redirect URL. Click
Save at the bottom of the page to save the settings.
Note: The prefix http:// or https:// must be included when entering
URLs/addresses/websites (ex. https://www.trendnet.com)
After you have defined the initial parameters, you can apply portal page customization.
Under Upload Image File, click Browse or Choose File depending on your browser, and
navigate to the directory where the selected image is located and select the image.
Once you have selected the image, click Upload.
Once you have uploaded the image, an image preview will appear and you can assign
the image Set as background or Set as logo. If you would like to delete the image and
upload a different image, you can also click Delete to delete the image.
Note: Only 2 images can be uploaded for portal page customization (Only one image can
be set for the portal page background and another image can be set for the
company/organization logo). Images are automatically scaled when uploaded. The
recommended image formats are JPG, PNG, GIF. Maximum file size for images is 250KB.