User's Guide

© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-821DAP
8
5. Click on Device settings to configure the access point.
 Product Name: Displays the device model
 IP Mode: Select the IP mode to apply on the device
o DHCP: Select this option to allow the device to receive IP address from your
DHCP server
o Static: Select this option to manually set the IP address of the device
 IP Address: Enter the IP address to assign to the device
 Subnet Mask: Enter the subnet mask to assign to the device
 Gateway: Enter the gateway IP address to assign to the device
 System Name: Assign name of the device to help distinguish between similar
devices
 VLAN ID: Assigns the VLAN ID for the Ethernet port.
 Band Steer: Select this to enable/disable band steering (Only available on dual
band AP models)
 Band: Select on the pull-down menu the wireless interface to configure (5GHz
only available on dual band AP models)
 802.11 Mode: Select the 802.11 mode of the selected wireless interface
 Channel: Select the wireless channel of the selected wireless interface
 VLAN ID: Assigns the VLAN ID for the primary SSID.
 Separate Stations: Select this option to restrict wireless client devices from
accessing other client devices connected to this network(s).
 Enable: Select this option to enable the selected wireless interface
 Visible: Select this option to wireless broadcast the selected wireless interface
 SSID: Enter the SSID (Wireless Network Name) of the selected wireless interface
 Security: Select the wireless encryption security for to assign the selected
wireless interface
 Key: Enter the wireless encryption security key or password
 Password: Enter the login password of the device and click OK to save settings