Quick Installation Guide TEW-821DAP (V1)
Table of Content 1 English 1. Before You Start 2. Initial Access Point Setup 3. AP Management Utility 4.
DEUTSCH FRANÇAIS ENGLISH 1. Before You Start Package Contents Ÿ TEW-821DAP Ÿ 1 x 5 ft. (1.5 m) network cable Ÿ CD-ROM (User's Guide and Utility) Ÿ Quick Installation Guide Ÿ Power adapter (12V DC, 1A) Ÿ Mounting Plate Minimum Requirements Ÿ Computer with network port and web browser Ÿ Network switch or router with an available network port РORTUGUÊS ESPAÑOL Mac Users: Please refer to the User's Guide to manually configure the access point.
2. Initial Access Point Setup 1. Bring the TEW-821DAP to a location of its final installation point. 2. Connect the TEW-821DAP to your router or switch. You may also connect the device directly to a network port on your computer. If you are connecting to a router or switch, make sure your computer is connected to the same network. 3. If you are connecting your TEW-821DAP to a PoE switch, the device will power on automatically.
1. Insert the included CD into your computer, and select AP Utility from the menu. Note: The AP Utility only supports Windows based computers. Please visit TRENDnet.com for complete list of the AP Utility’s supported operating systems. 2. Run the utility. The utility will attempt to detect your device automatically. If it does not, click on the Discover button. РORTUGUÊS ESPAÑOL DEUTSCH FRANÇAIS ENGLISH 3.
3. Select your device by checking the box next to your TEW-821DAP, and click on Device Settings. Static 4. The Device Settings page will show your basic Wi-Fi network settings. If your network requires a static IP address, select the Static radio button and enter your settings. If you are not sure, leave IP Mode on the default setting, DHCP.
ENGLISH 5. To configure your wireless network, select the Band from the dropdown menu, and enter your settings. If you are using both 2.4GHz and 5GHz networks, they must be configured individually. The Key is your current WiFi password. The default key is located on the white sticker on the bottom of the TEW-821DAP. ESPAÑOL DEUTSCH FRANÇAIS Band 6. When you are finished, enter the password for your TEW-821DAP (NOT your WiFi password) and click OK to save your changes.
9. To access the unit's advanced settings, launch the AP Utility, locate your TEW-821DAP, click on the IP Address, and select Yes to configure your device. 192.168.10.62 10. This will launch your default web browser, and automatically direct it to your TEW-821DAP for advanced settings. 11. On the Login screen, enter the username and password. If this is your first time accessing the device, or if the TEW-821DAP has been reset, the default login credentials are: Name: admin Password: admin 12.
ENGLISH РORTUGUÊS ESPAÑOL DEUTSCH FRANÇAIS 13. The status screen will display information about your TEW-821DAP access point, and the unit's wireless networks. 14. For detailed information on advanced settings and features, please refer to the User's Guide.
4. Mounting the Device 1. Remove the mounting plate from the TEW-821DAP. 2. Place the mounting plate on the wall or ceiling where the device will be located, and mark the location of the screw holes. Ensure that the device has enough clearance to slide on and off the mounting plate. If you are using a non-PoE router or switch, and external power is required, ensure that your mounting location has access to an electrical outlet. 3.
Manufacturer’s Name and Address TRENDnet, Inc. 20675 Manhattan Place Torrance, CA 90501 USA Zwolsestraat 156 2587 WB The Hague The Netherlands Product Information TEW-821DAP Model Number: N300 PoE Access Point Product Name: TRENDnet Trade Name: TRENDnet hereby declare that the product is in compliance with the essential requirements and other relevant provisions under our sole responsibility. Safety EMC EN 60950-1: 2006 + A11: 2009: + A1: 2010 + A12: 2011 + A2: 2013 EN 301 489-1 V1.9.
Certifications This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Waste electrical an electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or Retailer for recycling advice.
