User Guide

© Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-816DRM
38
 Discipline: Select the queue discipline.
o SP: In Strict Priority (SP), packets with a high priority are processed first. Not until
the first queue is empty will another queue be processed.
o WRR: In Weighted Round Robin, each queue can be given a different priority
level. Each traffic is assigned to a class and each class is given its own queue.
 WRR weight: Enter the your classified weights
 DSCP Mark: Select a DSCP mark. The DSCP mark is used to classify and prioritize
types of packets.
Queue Rule
This page allows you to configure a QoS queue entry and assign it to a specific network
interface. Each of the queues can be configured for a specific precedence. The queue
configuration will be used in Queue Classification to place ingress packets appropriately.
 Action: Check this box to enable this queue.
 Application: Select in the pull down menu the application of the rule, values are
preconfigured.
 Physical Ports: Select the interface on the pull down menu to implement this QoS
queue.
 Destination/Source MAC Address: Enter the destination and source MAC Address
to apply on the queue.
 Destination/Source IP Address: Enter the destination and source IP address to
apply on the queue.