User Guide

© Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-816DRM
37
4. Review the port trigger settings and click Apply to save setting.
 Service Name: Enter the name to assign rule.
 Rule Status: Select enable to activate rule.
 Trigger Port Start/End: Port or port range requested by the device.(e.g. 2000-2001
or 2000)
Note: Please refer to the device documentation to determine which ports are
required.
 Trigger Protocol: Select protocol to apply on rule
 Open Port Start/End: Enter the public port to assign on the rule
 Open Protocol: Select the public protocol to apply on rule.
Note: Please refer to the device documentation to determine which ports are required.
Prioritize traffic using QoS (Quality of Service)
Configuration > Advanced Setting > Quality of Service
You may want to prioritize outbound traffic for specific computers or devices on your
network to have higher priority.
1. Log into your router management page (see “Access your router management page”
on page 23).
2. Click on Advanced, and click on Quality of Service.
3. Review the settings and click on Apply to save settings.
Queue Management
This page allows you to enable QoS and choose Differentiated Services Code Point
(DSCP) markings to automatically mark incoming traffic without reference to a particular
classifier.
 Enable QoS: Check this box to enable the QoS feature.
 Direction: Select the direction of the traffic to configure.
 Queue Enable: Select to enable the queue.
 Bandwidth: Enter your internet Bandwidth.