Operation Manual

TRENDnet User’s Guide

TEW-812DRU

4. Review the QoS settings.

• Enable QoS: Enable or Disable the Quality of service through the router.

• Prioritize ACK: Enable or disable ACK prioritization.

• Prioritize ICMP: Enable or disable ICMP prioritization.

5. Select the traffic class you would like to configure for your QoS rule.

6. Review the Inbound/Outbound Class Setting section.

• BW Max Inbound: Enter the maximum download speed of your ISP (Internet

Service Provider).

• Highest/High/Medium/Low/Lowest: Enter the download speeds you would like to

apply on each state of download speeds. This setting is similar to setting the priority

speeds of each class

7. Review the QoS Rule settings. Click Add Rule to add and save the rule to the QoS Rule

List

• IP/MAC Address Filter: Select from the pull down menu the IP address or MAC you

would like to apply and enter the IP address of MAC address.

• Protocol Filter: Select the protocol you would like to apply on the QoS Rule.

• Port Filter: Select the port from the pull down menu you would like to assign on the

QoS rule and enter the port.