Installation guide

4
14. Select DHCP Connection (Dynamic IP
Address). Then click Next. (Dynamic IP is
typical for most ISP services. Verify service
with your ISP.)
Note: If you have a service other than
Dynamic IP, refer to the User's Guide for
installation instructions.
18. For added security the TEW-812DRU's
wireless network is pre-encrypted with its
own unique network security key. You can
find the unique security key and the
pre-assigned network name (SSID) on a
sticker on the front of the router and on the
label on the bottom of the router. You will
need this information to connect to the
router. To change the network security key
select Launch Wireless Security Setup
Wizard under the Wizard tab. If the router is
reset to factory defaults, the wireless
encrption will reset to the network security
key printed on the product label on the
bottom of the router.
Note: For instructions on using your USB
device with the TEW-812DRU, please refer
to the user's guide on the provided CD-ROM
17. Open up your browser and enter in a
website (e.g. www.trendnet.com) to verify
that you have Internet connection.
15. Click Apply.
16. Click Ok.
Wireless router installation is now complete.
For detailed information regarding the
TEW-812DRU’s configuration and advanced
settings, please refer to the User's Guide
CD-ROM, or TRENDnet's website at
http://www.trendnet.com.
Toll Free English Technical Support
US/Canada: 855-373-4741
Hours: Monday-Friday
7:00 AM- 6:00 PM, Pacific Standard Time.
After hours: 866-845-3673