User's Guide
Table Of Contents
- Product Overview
- Configuration
- Wireless Networking and Security
- Advanced configuration
- Access Point
- Basic
- Wireless Profile
- Wireless MAC filter
- Airtime Fairness
- Roaming Support (802.11k)
- RSSI Scanner
- IPv6 Settings
- Static IPv6
- Auto Configuration (SLAAC/DHCPv6)
- Change your IP address
- Captive Portal
- Configure Spanning Tree
- Set date and time
- Daylight Saving Time
- NTP
- Manual
- Manage VLAN
- Traffic Shaping
- Enable SNMP
- Enable CLI
- LED Controls
- Client Bridge
- WDS
- Repeater
- Maintenance & Monitoring
- AP utility
- Technical Specifications
- Troubleshooting
- Appendix
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-755AP
47
MAC: Displays the MAC address that is connected to the access point
WLAN (SSID): Displays the SSID (wireless network name) of the access point the device
is connected to
Access Point: Displays the wireless MAC address of the access points on the network
that the device is connected to
Signal strength (dBm): Displays the signal strength between the access point and the
client. ie: -40 is a stronger signal than -50.
Uptime: Displays the duration the client has been connected to the access point
Statistics
1. To view statistical data about your access point, click on the Statistics tab.
2. Review the statistics information below.
Clients by SSIDs: Displays the number of clients connected to the access point
in comparison between the different SSIDs (wireless network name). Mouse