User's Guide
Table Of Contents
- Product Overview
- Configuration
- Wireless Networking and Security
- Advanced configuration
- Access Point
- Basic
- Wireless Profile
- Wireless MAC filter
- Airtime Fairness
- Roaming Support (802.11k)
- RSSI Scanner
- IPv6 Settings
- Static IPv6
- Auto Configuration (SLAAC/DHCPv6)
- Change your IP address
- Captive Portal
- Configure Spanning Tree
- Set date and time
- Daylight Saving Time
- NTP
- Manual
- Manage VLAN
- Traffic Shaping
- Enable SNMP
- Enable CLI
- LED Controls
- Client Bridge
- WDS
- Repeater
- Maintenance & Monitoring
- AP utility
- Technical Specifications
- Troubleshooting
- Appendix
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-755AP
46
3. Enter the login password of the devices and click Upgrade to start the firmware
upgrade process.
Access Points
1. To view access points that are currently connected to your network, click on the
Access Points tab.
2. Review the AP setting information below.
System Name: Displays the name of the device. This can be changed in the AP utility
under Device Setting (see page 39)
BSSID: Displays the wireless MAC address of the access points on the network
IP Address: Displays the IP address of the access points on the network
Model Name: Displays the model number of the access points connected on the
network
Firmware Version: Displays the current firmware version of the access points connected
on the network
Status: Displays the current status of the access points connected on the network
SSID: Displays the SSID (Wireless Network Name) of the access points connected on the
network
Channel: Displays the current channel that the access point is on
Total Clients: Displays the number of clients (devices) that is currently connected to the
access point
Upload/Download: Displays the amount of data that the access point has sent and
received
Clients
1. To view devices that are currently connected to your network, click on the Clients tab.
2. Review the client setting information below.