Operation Manual

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-752DRU
39
1. Log into your router management page (see “Access your router management page”
on page 25).
2. Click on Tools and click on Firmware.
3. Depending on your web browser, in the Upload Firmware section, click Browse or
Choose File.
4. Navigate to the folder on your computer where the unzipped firmware file (.bin) is
located and select it.
5. Click Upload. If prompted, click Yes or OK.
Allow/deny ping requests to your router from the Internet
Access > Advanced Network
To provide additional security, you may want to disable your router from responding to
ping or ICMP (Internet Control Message Protocol) requests from the Internet. A ping is
network communication test to check if a device with IP address is alive or exists on the
network. By disabling this feature, you can conceal your router’s IP address and
existence on the Internet by denying responses to ping requests from the Internet. You
can additionally use this feature as a tool for troubleshooting purposes
1. Log into your router management page (see “Access your router management page
”
on page 25).
2. Click on Access, and click on Advanced Network.
3. Next to Enable WAN Ping Response, check the option to allow your router to respond
to ping requests from the Internet.
4. To save changes, click Save Settings.
Note: If you would like to discard the changes, click Don’t Save Settings.