Operation Manual

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-751DR
5
Performance
N600 Wireless
Proven concurrent dual band 300 Mbps Wireless N
Wireless Coverage
Extensive wireless coverage with MIMO antenna technology
Compatibility
Compatible with older Wireless G devices
Energy Savings
Embedded GREENnet technology reduces power consumption by up to
50%
IPv6
IPv6 network support
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical
specifications. Actual data throughput and coverage will vary depending on
interference, network traffic, building materials and other conditions
Product Hardware Features
Rear View
• Reset Button – Press and hold this button for 10 seconds to reset the router.
• WPS Button (Wi-Fi Protected Setup) – Push and hold this button for 5 seconds
to activate WPS. The Power LED will blink when WPS is activated.
• LAN Ports 1-4 – Connect Ethernet cables (also called network cables) from your
router LAN ports to your wired network devices.
• Internet Port – Connect an Ethernet cable from your router Internet port to
your modem.
• Power Port – Connect the included power adapter from your router power
port and to an available power outlet.
• On/Off Power Switch – Push the router On/Off power switch to turn your
router “On” (Inner position) or “Off” (Outer position).
Reset Button
10/100Mbps LAN
Ports 1-4
Internet Port
Power Port
WPS Button
On/Off Power Switch