Operation Manual

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-751DR
34
Set your router date and time
Main > Time
1. Log into your router management page (see “Access your router management page
”
on page 25).
2. Click on Main, and click on Time.
3. Review the Time settings. Click Save Settings to save settings.
• Time: Displays the current device time and date information.
• Time Zone – Click the drop-down list and select your time zone.
• Enable Daylight Saving: Check the option to enable daylight savings time and set
the annual range when daylight saving is activated.
• Automatically synchronize with Internet Time Server – Check the optionerver
option to set your router date and time to synchronize with an NTP (Network
Time Protocol) server address (e.g. pool.ntp.org). Enter the NTP server address
next to Default NTP server, (e.g. pool.ntp.org). Click the Time Zone drop-down list
to select the appropriate zone and you can optionally change your NTP Sync
period.
Note: NTP servers are used for computers and other network devices to
synchronize time across an entire network.
• Manually set time – Set your router date and time manually in the Date and Time
Settings section. Note: Time is specified in 24-hour format. In addition, you can
click Synchronize with Your Computer’s Time Settings to copy the time and date
settings from your computer.