Operation Manual

TRENDnet User’s Guide

TEW-751DR

IPv6 Connection Settings

Main > IPv6

IPv6 (Internet Protocol Version 6) is a new protocol that significantly increases the

number of available Internet public IP addresses due to the 128-bit IP address structure

versus IPv4 32-bit address structure. In addition, there are several integrated

enhancements compared to the most commonly used and well known IPv4 (Internet

Protocol Version 4) such as:

• Integrated IPsec – Better Security

• Integrated Quality of Service (QoS) – Lower latency for real-time applications

• Higher Efficiency of Routing – Less transmission overhead and smaller routing

tables

• Easier configuration of addressing

Note: In order to use IPv6 Internet connection settings, it is required that your ISP

provide you with the IPv6 service. Please contact your ISP for availability and more

information about the IPv6 service.

1. Log into your router management page (see “Access your router management page

”

on page 25).

2. Click on Main, and click on IPv6.

3. Review the IPv6 Internet Connection settings and enter information settings specified

by your ISP. Click Save Settings to save changes.

Note: Please contact your ISP for IPv6 service availability.

Select the IPv6 connection type provided by your ISP.

• Auto Detection

• Static IPv6

• Auto-configuration (SLAAC/DHCPv6)

• PPPoE

• IPv6 in IPv4 Tunnel

• 6to4

• 6rd

• Link-Local Only