Operation Manual

TRENDnet User’s Guide

TEW-751DR

• Channel Width: Select the appropriate channel width for your wireless network.

This setting only applies to 802.11n. For greater 802.11n performance, select

20/40MHz (Auto) (Options: 20MHz or 20/40MHz (Auto)). It is recommended to use

the default channel bandwidth settings.

Note: Please note that this setting may provide more stability than the higher

channel bandwidth settings such as 20/40MHz (Auto) for connectivity in busy

wireless environments where there are several wireless networks in the area.

o 20 MHz – This mode operates using a single 20MHz channel for

wireless devices connecting at 802.11n on both 2.4GHz and 5GHz. This

setting may provide more stability than 20/40MHz (Auto) for

connectivity in busy wireless environments where there are several

neighboring wireless networks in the area.

o 20/40MHz (Auto) –When 20/40MHz (Auto) is active, this mode is

capable of providing higher performance only if the wireless devices

support the channel bandwidth settings. Enabling 20/40MHz (Auto)

typically results in substantial performance increases when connecting

an 802.11n client.

• Visibility Status

o Visible - allows wireless devices to search and discover your wireless network

name (also called SSID) broadcasted by your router.

o Invisible - Turns off the ability for wireless devices to find your network. It is still

possible for wireless devices to be configured to connect to your wireless

network. Disabling this setting will disable WPS functionality.

• WMM: Wi-Fi Multimedia is a Quality of Service (QoS) feature which prioritizes

audio and video data packets. This feature requires the wireless device to also

support WMM. Click Enabled (recommended) or Disabled to turn this feature on

or off on your router. Note: This feature can only be disabled in 802.11b/g modes.

Guest Network

Access > Guest Zone

Creating an isolated and separate wireless guest network (2.4GHz or 5GHz) allows

wireless clients to connect to your network for Internet access only and keep your local

LAN network safe by restricting guest access to your LAN network resources such as

shared documents and media files on your computers, network storage, and printers.

1. Log into your router management page (see “Access your router management page

”

on page 25).

2. Click on Access and click on Guest Zone.

3. Review the Guest Zone settings, click Save Settings when finished.