User's Manual

ManualsBrandsTRENDnet ManualsRoutersTRENDnet TEW-737HRE

TEW-737HRE User’s Guide

Summary of content (27 pages)

PAGE 2
TEW-737HRE User’s Guide Table of Contents Table of Contents Product Overview ��1 Appendix ��15 Contents of Package �� 1 How to setup a static IP address on your computer’s network card ��
PAGE 3
Product Overview TEW-737HRE User’s Guide Product Overview Features TRENDnet’s N300 High Power Easy-N-Range Extender, model TEW737HRE, offers extreme wireless coverage to eliminate existing wireless network dead spots. Setup takes minutes with no CD installation and it stays out of the way by plugging directly into an outlet. Simply press the Wi-Fi Protected Setup (WPS) button on your router, then on the TEW737HRE and you’re done—it’s now extending your wireless network over a large area.
PAGE 4
Hardware Features TEW-737HRE User’s Guide Hardware Features WPS Button + LED Indicator Network Port Reset Button On/Off Switch • Network Port — Connect a network cable (Ethernet cable) to your computer for repeater configuration. • Reset Button — Resets your repeater. Push and hold this button for 5 seconds with a pin or paper clip to reset configuration to factory default. • On/Off Switch — Switch the On/Off button to turn on or turn off your repeater. © Copyright 2013 TRENDnet.
PAGE 5
TEW-737HRE User’s Guide Application Diagram Application Diagram TEW-737HRE is a high power repeater which can extend your wireless router’s range or coverage. Install TEW-737HRE at a location in between wireless router and your computer. © Copyright 2013 TRENDnet. All rights reserved.
PAGE 6
Setting Up TEW-737HRE User’s Guide Setting Up 2 Press and release the WPS button on the repeater. The LED will blinking in green, which means the TEW-737HRE has begun WPS pairing. 3 Press and hold the WPS button on the router for 5 seconds to start WPS pairing. There are two ways of setup: by pushing Wi-Fi Protected Setup (WPS) button or web browser configuration. WPS Connection Plug in the TEW-737HRE to a power outlet nearby your wireless router and switch the device on.
PAGE 7
Setting Up TEW-737HRE User’s Guide The LED will change to solid green once the WPS connection is established. 5 (Optional) Relocate the TEW-737HRE and plug at a location between wireless router and your computer. WPS 4 © Copyright 2013 TRENDnet. All rights reserved.
PAGE 8
Setting Up TEW-737HRE User’s Guide Web Browser Configuration 1 Plug in the TEW-737HRE to a power outlet nearby your wireless router and computer, then switch the device on. Open your computer’s wireless network settings and search available wireless networks for “TRENDnet737”. No security password is required. The wireless encryption security will be setup in following steps.
PAGE 9
TEW-737HRE User’s Guide 3 Setting Up Open a web browser and type http://tew-737hre or http://192.168.10.100 access the administration page. ( See trouble shooting page if you cannot access the administration page.) Enter administrator login information. (The default user name is admin and the password is printed on the device label.) * Please reference the troubleshooting section if you cannot access the administration web page. © Copyright 2013 TRENDnet. All rights reserved.
PAGE 10
Setting Up TEW-737HRE User’s Guide 4 Change your administrator password from the factory default setting. Click Apply to continue. 5 TEW-737HRE will apply the password change and then reboot. Click Back and login again with your new password. 6 Click Site Survey to look for the wireless router or access point you want to connect with. (If you want to setup the connection manually, just enter the SSID and skip site survey, go to step 8 directly.
PAGE 11
Setting Up TEW-737HRE User’s Guide Select authentication type and enter pass phrase and then click Apply. 9 TEW-737HRE will reboot to apply the change. The LED will cycle through flashing red, flashing amber, and then turn to solid green once the connection is established. 10 (Optional) Relocate the TEW-737HRE and plug at a location between wireless router and your computer. WPS 8 © Copyright 2013 TRENDnet. All rights reserved.
PAGE 12
Management TEW-737HRE User’s Guide Management Multi-Language Wi-Fi Setting Select your preferred language in the TEW-737HRE login page. Click Wi-Fi Setting in the menu. The default TEW-737HRE Wi-Fi setting will show up. You can change the setting or copy Wi-Fi setting from wireless router by clicking Site Survey. (See Setup section for details.) Wireless Client Click Wireless Client in the menu to list associated wireless clients. © Copyright 2013 TRENDnet. All rights reserved.
PAGE 13
Management TEW-737HRE User’s Guide Management Upload Firmware Click Management in the menu to change your administrator password, user password and device name. Administrator: Administrator is authorized to change TEW-737HRE settings. User: User is authorized to login and view TEW-737HRE settings, but not change them. Device Name: The host name can be searched on the network. You can change the host name of the TEW-737HRE to another name.
PAGE 14
Management TEW-737HRE User’s Guide Settings Management Status Click Status in the menu to list the TEW-737HRE status details. Click Save to export settings to your computer Restore Configuration Settings To restore settings previously saved on your computer, click Browse... to select a configuration file and then click Load to import the previous settings. Restore Factory Default Settings Click Restore to restore settings to factory defaults. System Reboot Click Restart to reboot your TEW-737HRE.
PAGE 15
Technical Specifications TEW-737HRE User’s Guide Technical Specifications Hardware Standards Wireless IEEE 802.11n, IEEE 802.11g, IEEE 802.11b IEEE 802.3u, and IEEE 802.
PAGE 16
TEW-737HRE User’s Guide Troubleshooting Troubleshooting Situation: I typed http://tew‐737hre but I am not able to access the unit. What should I do? Situation: I typed http://192.168.10.100 but I am not able to access the unit. What should I do? Solution: The host name prospecting is only for Windows systems, including Windows XP, Vista, 7 and 8. Please enter an IP address (default: 192.168.10.100) if you are not using Windows systems. Solution: 1. Turn the TEW-737HRE’s switch on. 2.
PAGE 17
Appendix TEW-737HRE User’s Guide Appendix 2. Type “network” in the search box and click Settings to focus your search. How to setup a static IP address on your computer’s network card If your computer has multiple network cards installed, physical and virtual, chances are you may experience difficulty in connecting to the TEW-737HRE without setting up your own IP address. This section will demonstrate how to setup an static IP on your network card.
PAGE 18
TEW-737HRE User’s Guide 5. Click Properties on the selected network adapter. Appendix 7. Click Use the following address and enter the static IP address and related information. For setting up the TEW-737HRE, you can enter 192.168.10.10 as your IP address, 255.255.255.0 as the Subnet mask. Leave the other fields blank. Click OK to apply the changes. 6. Select Internet Protocol Version 4 (TCP/IPv4) and then click Properties. © Copyright 2013 TRENDnet. All rights reserved.
PAGE 19
Appendix TEW-737HRE User’s Guide Windows 7 1. Click Control Panel from the Start menu. 3. Click Change adapter settings on the left-hand side. 4. Click Properties on the selected network adapter. 2. Type “network” in the search box to focus your selection. Click on Network and Sharing Center © Copyright 2013 TRENDnet. All rights reserved.
PAGE 20
TEW-737HRE User’s Guide 5. Select Internet Protocol Version 4 (TCP/IPv4) and then click Properties. © Copyright 2013 TRENDnet. All rights reserved. Appendix 6. Click Use the following address and enter the static IP address and related information. For setting up the TEW-737HRE, you can enter 192.168.10.10 as the IP address, 255.255.255.0 as the Subnet mask. Leave other fields blank. Click OK to apply the changes.
PAGE 21
TEW-737HRE User’s Guide OS X 1. Click the Apple logo in the top-left corner of your screen. Click on System Preferences... . In the Internet and Wireless section, click on Network. Appendix 2. Select the network card you want to configure on the left banner (e.g. Wi-Fi ). Click Advanced ... 3. Choose TCP/IP. In Configure IPv4, select Manually. Input the static IP address, subnet mask, and your router IP address. (In order to setup the TEW-737HRE, you can put in 192.168.10.10 as the IP address, 255.255.
PAGE 23
TEW-737HRE User’s Guide Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 24
Declaration of Conformity TEW-737HRE User’s Guide Europe – EU Declaration of Conformity France and Italy where restrictive use applies. This device complies with the essential requirements of the R&TTE Directive 1999/5/EC, 2006/95/EC and 2009/125/EC..
PAGE 25
Declaration of Conformity TEW-737HRE User’s Guide cs Česky [Czech] da Dansk [Danish] de Deutsch [German] et Eesti [Estonian] en English es Español [Spanish] el Ελληνική [Greek] Français [French] fr it Italiano [Italian] lv Latviski [Latvian] lt Lietuvių [Lithuanian] TRENDnet tímto prohlašuje, že tento TEW-737HRE je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES, 2006/95/ES, a 2009/125/ES.
PAGE 26
TEW-737HRE User’s Guide Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. • • TEW-737HRE – 3-year warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.