Operation Manual

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-732BR
19
1. Log into your router management page (see “Access your router management page”
on page 21).
2. Click on Access, click on Filter, and click on Domain/URL Blocking.
3. Review the Domain/URL blocking options.
• Disabled – disables domain/URL blocking
• Allow users to access all domains listed. (Deny access to all other unlisted websites)
• Deny users to access all domains listed. (Allow access to all other unlisted websites)
Click Apply to save the changes.
4. Under Domain Blocking click on Allow or Deny. The Domains List will then appear.
Enter the Website/URL/domain (e.g.www.trendnet.com) or keyword (e.g. trendnet) to
allow or block access and click Add to add this to the domains list. The entry will be
listed below. Repeat for each additional website or keyword added.
• Cancel - Discard changes to the domains list.
• Delete -Delete an existing website/URL/domain or keyword entry, click on the entry
in the Domains List. When selected, the entry will be highlighted. Click Delete to
remove it from the list.
5. Go back to the Domain Blocking section and confirm you want to Allow or Deny
access to the Domains List. It is generally easier to manage a list of Domains for which
access is denied.
6. In Domain Blocking click on Apply to save the selected settings.
Protocol/IP filters
Access > Filter > Protocol/IP Filters
You may want to block computers or devices on your network access to specific ports
(used or required by a specific application) to the Internet.
1. Log into your router management page (see “
Access your router management page”
on page 21).
2. Click on Access, click on Filter, and click on Protocol/IP Filters.
To simplify configuration, there is a list of commonly used pre-defined Protocol/IP Filters
to modify otherwise, you can choose to manually add a new Protocol/IP Filter.